(800) 894-0412 (888) 723-4773 (Fax)
Saginaw Control &, Engineering's Type 12 Pushbutton Enclosures are designed to house oil-tight push buttons, switches, and pilot lights. Saginaw Pushbutton Enclosures are primarily used in an indoor environment to protect against dust, falling dirt, dropping of non-corrosive liquid, and light splashing of water.
Product Attributes
- ANSI-61 powder coated finish
- Memory retaining oil resistant urethane gasket
- Threaded inserts and captive stainless steel screws
- Add the letter "I" to the end of the part number to receive the enclosure with 22.5 mm international pushbutton holes
- Can be custom ordered in Type 304 or 316 stainless steel.
If you are looking for Saginaw Enclosures. please call us at (800) 894-0412 or email us at info@ctiautomation.net we will do our best to help you find the Type 3R Saginaw Enclosure that you are looking for at the most competitive prices possible. If you are searching for NEMA 4X Saginaw Enclosures technical information (data-sheets) please use the datasheets or product selection guide page links.
Saginaw Control &, Engineering's Type 12 Operator Systems are designed to house a wide variety of equipment, panel mount, rack mount, desktop PC's, industrial monitors, keyboards and panel views. These enclosures are primarily used in an indoor environment to protect against dust, falling dirt, dropping of non-corrosive liquid, and light splashing of water.
Product Attributes
- One-piece construction allows flexibility and maximizes the usable interior space.
- Memory retaining oil resistant urethane gasket.
- Exclusive SCE concealed hinges on work station enclosures.
- Work Stations are available in textured beige or 304 stainless steel.
- Slope Top Workstations have 20 degree sloped top and 12.5 degree sloped keyboard desk.
- Operator system enclosures can be custom ordered in type 304 or 316 stainless steel.
- Many accessories available.
Operator Interface
Saginaw Control &, Engineering's Type 1 Enclosures are designed for control and instrumentation applications. They are a general-purpose enclosure intended for indoor use or locations where unusual service conditions do not exist. Type 1 Enclosures primarily provide protection against accidental contact with live parts and against a limited amount of falling dirt.
Product Attributes
- The SCE design incorporates an exclusive sub-panel design, which maximizes available space for all size enclosures.
- Any of the standard SCE quarter turn replacement latches and handles can be used in the Type 1 products.
- Type 1 Enclosures with knockouts have keylocking latches.
- Continuously hinged doors are easily removed from enclosure body.
- Type 1 Enclosures have ANSI-61 gray powder coat finish.
- Type 1 Enclosures with knockouts are available in precaution blue, safety orange or taupe tan textured powder coat finish.
Saginaw Control &, Engineering's Type 3R Enclosures (NEMA 3R) are designed to house electrical controls, instruments and components. These enclosures are primarily used in an outdoor environment to protect against rain, sleet and snow, and indoors against dropping water.
Product Attributes
- Made of heavy gauge galvannealed steel for increased corrosion protection
- ANSI-61 gray powder coated finish
- Rain cap to prevent direct entry of water
- Memory retaining oil resistant urethane gasket
- Any of the standard SCE quarter turn replacement latches and handles can be used
- Hinged 3R Enclosures incorporate the exclusive SCE concealed hinges
Saginaw Control &, Engineering's Type 4 Enclosures are designed to work in a wide range of environments indoors or outdoors, and house electronic controls, instruments, and components. These enclosures provide protection from wind blown dust, rain, splashing water, hose directed water and ice formation on the enclosure.
Product Attributes
- ANSI-61 gray powder coated finish.
- Exclusive SCE concealed hinges on Enviroline Series Enclosures.
- Memory retaining oil resistant urethane gasket.
- Many of the standard SCE quarter turn replacement latches and handles can be used on Enviroline Series Enclosures.
Saginaw Control &, Engineering's Type 4X Stainless Steel Enclosures are designed to work in a wide range of environments indoors or outdoors, and house electronic controls, instruments, and components. Saginaw NEMA 4X stainless steel enclosures provide protection from corrosion, wind blown dust, rain, spraying water, hose directed water and ice formation on the enclosure.
Product Attributes
- 304 stainless steel with #4 brushed finish
- Add the letter "I" to the end of the pushbutton enclosures part number to receive the enclosure with 22.5 mm international pushbutton holes
- Exclusive SCE concealed hinges on Enviroline Series Enclosures
- Memory retaining oil resistant urethane gasket
- Any of the standard SCE quarter turn replacement latches and handles can be used on Enviroline Series Enclosures
- Can be custom ordered in 316 stainless steel
Type 4X Stainless Steel
Saginaw Control &, Engineering's Type 4X S.S.Disconnect Enclosures are designed to work in a wide range of environments indoors or outdoors, and house most standard types of disconnects and circuit breakers as well as house electronic controls, instruments and components. These enclosures provide protection from corrosion, wind blown dust, rain, spraying water, hose directed water and ice formation on the enclosure.
Product Attributes
- 304 &, 316 stainless steel with #4 brushed finish.
- Provides provisions for flange mounted disconnects and circuit breakers.
- Exclusive SCE concealed hinges on Enviroline Series Enclosures.
- Memory retaining oil resistant urethane gasket.
- Any of the standard SCE quarter turn replacement latches and handles can be used on Enviroline Series Enclosures.
NEMA 4X Stainless Steel Disconnect
Saginaw Control &, Engineering's Type 4X fiberglass enclosures are designed for indoor or outdoor use to house electronic controls, instruments and components in areas that may be regularly hosed down, in very wet conditions, or are exposed to corrosive agents. These enclosures provide protection from corrosion, wind blown dust, rain, spraying water, hose directed water and ice formation on the enclosure.
Product Attributes
- Polyester fiberglass sheets are reinforced with short strands of fiberglass in random order in the polyester resin.
- Memory retaining silicon gasket.
- Quick release padlock latches made of stainless steel.
- Stainless steel continuous hinge.
- Custom and stock sizes available on request.
NEMA 4X Fiberglass
Saginaw Control &, Engineering's Type 4 Disconnect Enclosures are designed to work in a wide range of environments indoors or outdoors, and will house most standard types of disconnects and circuit breakers as well as electronic controls, instruments, and components. These enclosures provide protection from wind blown dust, rain, splashing water, hose directed water and ice formation on the enclosure.
Product Attributes
- ANSI-61 gray powder coated finish.
- Provides provisions for flange-mounted disconnects and circuit breakers.
- Exclusive SCE concealed hinges on Enviroline Series Enclosures.
- Memory retaining oil resistant urethane gasket.
- Any of the standard SCE quarter turn replacement latches and handles can be used on Enviroline Series Enclosures.
NEMA 4 Disconnect
Saginaw Control and Engineering's Industrial Modular System Enclosures (IMS) are designed to house electrical and electronic controls, instruments and components, with integrated mounting channels in the top and bottom of the enclosure and grid mounting options making this product more flexible and easier to work with. These enclosures are primarily for use in an indoor environment to protect against dust, dropping of non-corrosive liquids and light splashing of water.
Product Attributes
- White powder coat finish inside and out.
- Easily interconnected and interlocked.
- Easy to install mounting panels with increased available space.
- Subpanels can be installed at any depth of the enclosure.
- SCE exclusive concealed hinges, making doors easy to remove and interchange.
- SCE heavy duty three point padlocking handles.
- Flange trough collar around all door openings.
- A hinged slave door is provided on disconnect enclosures for unobstructed access to the insde of the enclosure.
- Grid mounting available to take full advantage of internal space.
Industrial Modular
Saginaw Control &, Engineering's Type 12 Enclosures are designed to house electrical and electronic controls, instruments and components. These enclosures are primarily for use in an indoor environment to protect against dust, falling dirt, dropping of non-corrosive liquid, and light splashing of water.
Product Attributes
- ANSI-61 gray exterior with white powder coated interior.
- Many parts are available in 304 stainless steel for corrosive protection.
- Exclusive SCE concealed hinges on Free Standing and Wall Mount Overlapping Door Enclosures.
- Memory retaining oil resistant urethane gasket.
- Can be custom ordered in Type 304 or 316 stainless steel.
Type 12 Steel &, Stainless Steel
Saginaw Control &, Engineering's Type 12 Disconnect Enclosures are designed to house most standard types of disconnects and circuit breakers as well as electrical and electronic controls, instruments and components. Primarily for use in an indoor enviroment to protect against dust, falling dirt, dropping of non-corrosive liquid, and light splashing of water.
Product Attributes
- ANSI-61 gray exterior with white powder coated interior.
- Provides provisions for flange mounted disconnect and circuit breakers.
- Many parts are available in 304 stainless steel for non-corrosive protection.
- Exclusive SCE concealed hinges on Modular Enclosures.
- Memory retaining oil resistant urethane gasket.
- Can be custom ordered in Type 304 or 316 stainless steel.
NEMA 12 Disconnect
Enviroline Series Trough Enclosures are designed to house electrical controls, instruments and components used in an indoor or outdoor environment. Trough enclosures are available Stainless Steel with #4 brushed finish or Steel powder coated ANSI 61 gray, with or without viewing window. Trough enclosures with window have large viewing area for easy visibility of digital or analog components inside.
Designed to house electrical controls, instruments and components used in an indoor or outdoor environment to provide a degree of protection for the equipment inside the enclosure against ingress of solid foreign objects (falling dirt), and provide a degree of protection with respect to the harmful effects on the equipment due to the ingress of water (rain, sleet, snow).
Enviroline Trough Junction
Saginaw Control &, Engineering offers hundreds of accessories that complement our enclosure product line, making it easy to modify or add special features to standard products.
- Air Conditioners
- Casters, Leveling Pads
- Door Latches and Handles
- Door Stop Kits
- Drip Shields and Rain Hoods
- Fans, Fan Packages, Blower Packages
- Folding Shelves and Pull Out Shelves
- Floor Stands, Mounting Strips, Mounting Feet
- Fluorescent Lighting
- Grounding Bars, Grounding Straps
- Heaters
- Hole Plugs
- Interior and Exterior Print Pockets
- Louvers, Filters, Filter and Grille Packages
- Mechanical and Electrical Interlocks
- Program Ports and Convenience Receptacles
- Subpanels, Galvanized Subpanels
- Swing Out Panel Kits
- Terminal Kits
- Windows and Window Kits
- Wire Covers
LED light fixture is designed to provide interior lighting for an enclosure. Can be mounted to light channels in the top of an enclosure or on the front flange of most enclosures. Door activated adjustable switch, switch can be removed and relocated. Terminal block on each end of fixture, making it easy to wire and daisy chain multiple lights continuously. LED bulb with PVC frosted white protective light diffuser included. Housing made from steel and powder coated white. Units with convenience receptacle outlet are 120 VAC with ground 50/60 HZ. Without convenience receptacle outlet 100 to 277 VAC 50/60 HZ.
LED Light Fixtures
Saginaw Control &, Engineering has been serving the electrical industry since 1963. We specialize in manufacturing both standard stock and custom designed enclosures as well as precision sheet metal fabrications. Our 255,000 square foot manufacturing and warehouse facility, located in Saginaw, Michigan, uses state of the art fabricating equipment including the newest laser technology. All Saginaw Enclosure products are protected with the highest quality paint and powder finishes available in today's market. In addition to our manufacturing facility and warehouse, Saginaw Control &, Engineering has distribution centers in Aurora, Ohio, and Kenosha, Wisconsin. Both are 30,000 square feet and are conveniently located to serve enclosure customers throughout the U.S. Saginaw Enclosures can supply top-notch quality products built to accurate dimensions.
From concept to completion, the SCE staff will work with you to satisfy your needs. Whether you require a standard stock enclosure or a custom built enclosure, SCE can be Your Enclosure Source. As one of the leading electrical enclosure manufacturers in the country, Saginaw Controls &, Engineering, Inc. headquartered in Saginaw, Michigan, has been able to improve productivity and drastically reduce finishing time by switching from a TIG (GTAW) welding process to an innovative MIG (GMAW) process from The Lincoln Electric Company. The change has also enabled Saginaw Enclosures to install a new automated production line, further enhancing productivity at this 40-year-old company. Although Saginaw Enclosures had used the MIG (GMAW) process previously in some areas of its plant, the intermittent spatter associated with traditional MIG, as well as the distortion created on thin materials, prevented the company from looking to conventional MIG as a real solution throughout the plant. Saginaw Control &, Engineering found that the STT process is able to yield a weld that is consistent and smooth, with a cosmetic appearance similar to TIG, but with the added-benefit of increased travel speeds, virtually eliminating spatter and distortion on these enclosure products which house electrical components.
According to Fred May, President &, CEO of Saginaw Control &, Engineering, creating quality welds is key to the success of the company's product. "In this business, it is imperative to have high integrity welds because many of Saginaw Electrical Enclosures are found in harsh environments. If a weld fails, it could mean potential damage to the very items Saginaw Enclosures are designed to protect," said May. "It is this high quality that keeps our customers coming back." Another key to the success of Saginaw Controls &, Engineering is having flexible equipment. The company manufactures a broad range of products, including more than 1,000 stock parts and hundreds of custom parts. Electrical enclosures can range in size from 4" x 4" to 90" x 200", and be composed of steel, stainless steel, aluminum, galvanized and galvanneal. These products can be found on machine tools and plumbing stations in industries such as automotive, food processing, water treatment, waste treatment and construction/mining. Saginaw Enclosures' customer list boasts such well-recognized brand names at General Motors, Ford Motor Company and Siemens.
Whether we have Saginaw Enclosures in stock in Boise Idaho or need to ship direct from Saginaw Control &, Engineering to any USA cities, CTi Automation can get Saginaw Enclosures to you fast and save you some money. Our Saginaw Control &, Engineering distributors warehouse stocks some SCE products enabling us to further assist you in finding the correct Saginaw Enclosures in the USA, Canada, or Mexico. It will be very helpful if you have the Saginaw Enclosure part numbers ready, then our sales representatives can provide you with a pricing and availability quote for Saginaw Disconnect Enclosures that you are looking for in seconds. If you do not have the part numbers for Saginaw Stainless Steel Enclosures, our application engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible.
0 comments:
Post a Comment