Drum Lifters Morse Drum Lifter Hoist Attachments Below-Hook Drum Lifters

Drum Lifters

Morse below-the-hook drum handlers and pail handlers are manufactured by Morse Mfg. Co. Inc. in East Syracuse, NY 13057 USA. Every one is load tested at the factory at 125% of rated capacity as per American National Standard ANSI/ASME B30.20, and a load test certificate is enclosed with each unit when shipped. See Load Test Video

Morse drum lifters comply with ANSI/ASME B30.20 standard for mechanical, below-the-hook lifting devices as it applies to the following:

Drum Lifter Spotlight!

Material handling safety conscious drum lifter hoist attachment

Use this below-the-hook barrel lifter to transport your drum in upright position. The drum is supported on a bar under the drum, and secured with a positive grip cinch chain and ratchet mechanism around the drum. This below-hook barrel lifter attaches to your monorail, crane, or chain block. You may also attach the barrel lift to your forklift using Morse Fork Hook .

Where is this drum lifter used?

Docks and mezzanines Oil rigs and other marine applications Construction sites

Handle a variety of drums

Steel, fiber or plastic drum lifter Drum 23", to 38", (58.4 to 96.5 cm) tall Drum with 22", to 23.5", (55.9 to 59.7 cm) diameter Also accepts Diameter Adaptors for various sizes of smaller drums Capacity: 1,000 Lb. (454 kg)

Product weight: 50 Lb. (22.7 kg)

Overall product dimensions without drum:

L25.5", W16", H49.25", (64.8 x 41 x 125 cm)

Domestic ship weight: 61 Lb. (28 kg)

Source