The DuraCoat Firearm Finishes Direct provides the DuraCoat System which is the very latest in firearm finishing technology. No other commercially manufactured and packaged firearm finishing system offers the versatility, durability and user friendly characteristics of DuraCoat. DuraCoat is extremely easy to apply. Anyone can do it. DuraCoat was designed for the average gun owner. Preheating, baking and blasting are not required. Expensive, space consuming equipment is not needed. Simply clean and degrease the surface prior to application. DuraCoat is permanent, and provides a professional finish.
You can purchase a Camopak kit with the Pattern and paint, or just the paint and roll your own. You need access to an airbrush, HVLP spray gun or conventional spray gun, and a place to work. You can apply DuraCoat to any firearm and have a professional finish that will last several lifetimes. If you have ever painted a lawn chair you can use Duracoat.
DuraCoat Information
- The DuraCoat System is the very latest in firearm finishing technology. No other commercially manufactured and packaged firearm finishing system offers the versatility, durability and user friendly characteristics of DuraCoat.
- DuraCoat comes in over 200 standard colors plus Clear and can be blended to match any color of the spectrum. Packaged in matte and semi-gloss sheens. DuraCoat can be blended to any sheen level, and applied in a multitude of textures
- DuraCoat can be applied to ferrous metals, alloys, stainless steel, synthetics, wood, etc, etc. No preheating or baking is required.
- Duracoat is also available in four turnkey finishing kits designed to meet the needs of all levels of firearms finishers, from beginners to high volume gunsmiths.
- DuraCoat is available in an ever growing line of CamoPaks with a variety of Peel 'N Spray Camo Templates providing a complete firearms camouflage system.
- DuraCoat is packaged in 4 ounce, 8 ounce, 16 ounce, 32 ounce, and 128 ounce sizes, and is supported by a battery of finishing equipment, coatings, and solutions.
DuraCoat Refinishing Notes
- Generally you need only wait overnight, or 1 hour if baked at 110 degrees F, to reassemble and fire your weapon. Most abrasive solvents, cleaners, and lubricants can also be used at this point. Full cure time for DuraCoat is three to six weeks.
- When using multiple colors, such as camouflage patterns, DuraCoat Clear will even out the sheen, or reflection differences between colors, giving your surface an even, finished appearance.
- DuraCoat colors can be mixed with each other to match any color in the Spectrum.
- DuraCoat can be applied in a multitude of textures, with dry film thickness from .25 mils to 1.5 mils. You may add more on high-wear areas where tolerance is not an issue. The thicker and heavier you spray, the shinier your finish will become.
- The ideal mixing ratio of DuraCoat to DuraCoat Hardener is 12 parts DuraCoat to 1 part Hardener. You can make your finish glossier or shinier by adding a little more Hardener, up to 10:1. You can make the finish duller, or more matte by using less Hardener, down to 14:1. Any greater or lesser ratio of Hardener may negatively affect durability.
- To remove any adhesive that remains when you peel off your stencil, user mineral spirits and a clean rag. Mineral spirits will not remove the newly applied DuraCoat, but will dissolve the stencil adhesive. Stencils may be reused many times.
DuraBake &, DuraHeat Information
DuraBake has the same properties as DuraCoat but is baked (uses heat to cure) instead of adding hardener as you do with DuraCoat. DuraBake is available in easy to use aerosol spray cans and in about a dozen of the more popular colors.
DuraHeat high temp is available in six colors and used primarily on the barrels of fully automatic weapons. DuraHeat is capable of withstanding temperatures of up 1800 degrees F, and cures at room temperature.
www.DURACOAT-FINISHES.com
24 hrs. / 7 Days a week
Main Web Site
In response to requests from retailers and finishers that either supply DuraCoat products for resale, or provide professional finishing of weapons. We have set up the
0 comments:
Post a Comment