Clean the torch nozzle and the metal you plan to weld. Use a metal cleaner on the metal, then brush it with a steel-bristled brush designed for use on metal to remove any small particles that might remain. Dirt or impurities left on the metal can cause problems or weaknesses within the weld.
Assemble the welding torch by hand, attaching the nozzle you cleaned. Check the gas pressure on the oxygen and acetylene tanks to make sure that each has at least 50 pounds per square inch (psi) of pressure, then connect the gas lines to your torch.
References More Like This
Materials Used in Welding
You May Also LikeWelding with oxygen and acetylene is a cheap and time-efficient way to complete metal projects yourself. The tool for this type of.
An oxy-acetylene torch is a tool that can be used to weld two pieces of metal together. While the torch can make.
This article is aimed at taking you through some basic steps involved with tack welding sheet metal together using a Metal Insert.
Proper cutting torch maintenance not only prolongs the life of your oxy acetylene torch, it allows for cleaner, more precise cutting. Dirty.
Oxygen acetylene welding requires following safe procedures. It can be dangerous unless you observe the proper precautions. The area must be free.
The oxy-acetylene torch, which uses fuel gases and air for welding, is relatively inexpensive and suitable for welding aluminum. Although this type.
Proper safety procedures are imperative when using an oxy-acetylene torch. Oxy-acetylene torches use a mixture of oxygen and acetylene gases to cut.
0 comments:
Post a Comment