Tuesday, March 31, 2015

What is a LM7805 Voltage Regulator?

What is a LM7805 Voltage Regulator?

A LM7805 Voltage Regulator is a voltage regulator that outputs +5 volts.

An easy way to remember the voltage output by a LM78XX series of voltage regulators is the last two digits of the number. A LM7805 ends with "05" , thus, it outputs 5 volts. The "78" part is just the convention that the chip makers use to denote the series of regulators that output positive voltage. The other series of regulators, the LM79XX, is the series that outputs negative voltage. So:

LM78XX. Voltage regulators that output positive voltage, "XX"=voltage output.

LM79XX. Voltage regulators that output negative voltage, "XX"=voltage output

The LM7805, like most other regulators, is a three-pin IC.

Pin 1 (Input Pin): The Input pin is the pin that accepts the incoming DC voltage, which the voltage regulator will eventually regulate down to 5 volts.

Pin 2 (Ground): Ground pin establishes the ground for the regulator.

Pin 3 (Output Pin): The Output pin is the regulated 5 volts DC.

Be advised, though, that though this voltage regulator can accept an input voltage of 36 volts, it is recommended to limit the voltage to 2-3 volts higher than the output regulated voltage. For a 5-volt regulator, no more than 8 volts should be applied as the input voltage. The difference between the input and output voltage appears as heat. The greater the difference between the input and output voltage, the more heat is generated. If too much heat is generated, through high input voltage, the regulator can overheat. If the regulator does not have a heat sink to dissipate this heat, it can be destroyed and malfunction. So the two options are, design your circuit so that the input voltage going into the regulator is limited to 2-3 volts above the output regulated voltage or place a heat sink in your circuit to dissipate the created heat.

If you want to learn more about connecting a regulator in a circuit, check out How to Connect a Voltage Regulator to a Circuit

Source

Portable Air Conditioner Lowes

Portable Air Conditioner Lowes

Homeowners have a wide range of options to choose from when it comes to purchasing air conditioners. With the modern home always opting for way to maximize on the available space, the portable air conditioner Lowe’s has emerged as a great appliance that has become a huge hit among many people. Cooling your room with Portable Air Conditioner Lowes can be the best possible way of cooling your house in a healthy way.

These units are energy efficient and simple alternatives to window units or central air and they take care of certain areas that need to be cooled and are great for temporary and small spaces such as flats and apartments.

The operation of these portable air conditioners is simple as well. The indoor air vents through an exhaust tube that is installed on the window sill. Such units are actually portable and can be rolled to wherever you need them. These air conditioners are mobile and so you can carry them with you wherever you go. All you need to do is install the window air exchange panel and hose and then after that you turn it on.

The features of a standard Portable Air Conditioner Lowes include remote control, dehumidifier mode and timer. There is also a heat pump option that opens the door for all over the year round use.

If you want to remove condensed water from the portable air conditioner unit then most offer the facility of a water receptacle that comes with a direct drain option. However, it should also be noted that many are self evaporative to get rid of excess moisture as the unit runs.

You need to figure out the right size of unit that will suit your needs in the best way possible. Always remember that a bigger unit does not mean a better option. In fact, a portable unit that is too large in size will cycle on and off at a very frequent rate. In this way it will consume too much of energy and cause unnecessary wear on the electrical components of the unit.

Knowing important terminologies

Choosing the right portable air conditioner Lowe’s for your home is very easy. However, knowing certain important terminologies will help you in going a long way.

BTU – This means British Thermal Unit which is the international measurement of energy. In an air conditioning unit, a BTU is the measurement of the amount of heat that the unit can remove from the room.

EER – The Energy Efficient Ratio is derived by dividing the BTU by the number of watts. Thus, the higher the amount of EER, the more efficient the unit will be.

Thermostat – This adjusts the temperature of the air that comes out from the unit. They can be manual or programmable.

Filter – AC units with filters can be replaced and cleaned easily. It facilitates the presence of clean air in the room and clean air is important for healthy operation of the unit. It promotes a healthy environment as well.

Fan – The fan is the part that moves the air. A variable speed of the fan that is combined with an adjustable thermostat serves as an effective cooling unit. It is recommended that you search for cooling units that come with right/ left and up/down.

Chassis – A fixed chassis is a feature of a light weight air conditioning unit. The units that are smaller in size are easy to remove for the purpose of winterization. The larger and heavier models come with a slide out chassis. The unit is able to slide out easily.

You need to maintain your air conditioning unit in a proper condition so that it works properly for many years. It is essential to keep the coils and filter clean or get them replaced if needed. Remove the grill inside and then the foam filter. It is suggested to wash it warm and soapy water. Rinse in clean water and allow it to dry properly before securing it again. You should also vacuum the interior of the unit in order to get rid of bugs, dirt and leaves.

Source

Creatine hydrochloride

Ingredient Guide Creatine Supplementation At Its Best

WHY YOUR BODY NEEDS CREATINE

Creatine is a naturally-occurring nitrogenous organic acid. It helps the body supply energy to muscle and other cells.* Half the creatine we need is produced internally, the rest you must get from foods and supplements.

Creatine works for athletes looking to pack on muscle, strength, tone.* It works at the molecular level to promote what you desire in the gym: power, strength, energy, endurance and muscle growth support.* The body can function without creatine, but cellular work and repair happens at a diminished rate.

Replenish Your Energy Reserves*

SUPPLEMENT WITH CREATINE FOR MORE MUSCLE POWER*

Creatine occurs naturally in the body and comes from food sources like beef. Creatine may replenish your energy reserves during resistance training.*

Creatine works by saturating your muscles with a high-energy compound called creatine phosphate, and it can be used by the body as an immediate energy supply when you need to push out those last few reps in the gym.* Creatine also hydrates muscle cells with water, promoting muscle fiber growth.*

When those creatine phosphate stores run out, you risk cutting your workout short, so don't be depleted in the gym and always be prepared by adding creatine to your supplement line.

Get Pumped With This New Kid On The Block*

GET PUMPED WITH THIS NEW KID ON THE BLOCK*

Creatine HCl dramatically increases muscle cell volumization. This causes an anabolic response that orders those cells to expand. It promotes increased strength and power, muscle mass, workout capacity and recuperation.*

It is one of the most concentrated creatines in existence today.* Do NOT confuse with Creatine Ethyl Ester, these are different substances.

Get More Muscle With Less Product

HCL WATER SOLUBILITY POWER*

The biggest difference between Creatine HCl and other creatine products is its water solubility. According to studies, it completely dissolves in water. This is big news because humans are 60-70% water. That means Creatine HCl may completely dissolve in your body, which may reduce the chance of waste.*

Virtually none of Creatine HCl is converted to creatinine (an unusable byproduct of creatine monohydrate).*

HCl water solubility also means that your body can use the creatine quickly and efficiently.* Because there is no loading phase, HCl works very quickly.*

Micro-Dose Bulking

NO NEED TO CYCLE ON AND OFF CREATINE HCL*

Creatine HCl requires a much smaller dose than creatine monohydrate: take 1/4 tsp per 100 pound of bodyweight once per day. It gets better results than heaping scoops of many other products.

Since you don't have to cycle off this product, you can take it all year long and not risk a plateau. It continues to help support building muscle and strength as long as you use it as part of a healthy diet and exercise plan.* Creatine HCl helps you build muscle, it doesn't do it for you.

Source

Quantum Nutrition Labs

Quantum Nutrition Labs

** These statements have not been evaluated by the Food and Drug Administration. These products are not intended to diagnose, treat, cure or prevent any disease.

"Original", "Regular" and "Retail Price" are based on manufacturer suggested retail prices or informal surveys of Internet retailers, and, are intended for reference only. No sales may have occurred at the referenced prices. Sales, promotions and special offers are valid for a limited time and may be withdrawn or terminated without advance notice.

My Natural Market ("MNM") provides links and articles for informational purposes only. MNM does not review, approve or recommend any commercial site, and the links and articles are not intended to provide medical advice, diagnosis, or treatment, and are not meant to replace professional medical advice or apply to any of the products sold by MNM. THE INFORMATION ON THIS WEBSITE IS NOT INTENDED TO DIAGNOSE, TREAT, CURE OR PREVENT ANY DISEASE.

The information provided on this site is generally furnished by the manufacturer and/or distributor of the product and is intended for your general knowledge. IT IS NOT A SUBSTITUTE FOR PROFESSIONAL MEDICAL ADVICE OR TREATMENT. ALWAYS SEEK THE ADVICE OF A QUALIFIED HEALTH CARE PROFESSIONAL REGARDING ANY MEDICAL CONDITION.

Product sold on this site is not labeled or intended for resale. All orders placed through this website are subject to MNM acceptance, in its sole discretion. This means that MNM may refuse to accept, or may cancel, any order, whether or not it has been confirmed, without liability to you or any third party. MNM reserves the right to discontinue any program or offer.

My Natural Market, 12636 S 125 W Suite C Draper, Utah 84020

Source

Generator interlock

Select brand of load center breaker panel at right ->,

Safety is an important part of our lives. Safety for your person and safety for your investments and there isn’t a much more important investment than your home. Our breaker panel load center Interlock kit allows you to connect your portable generator to your electrical system safely without danger of backfeed to utility power. With the generator feeding your home electrical system it eliminates the need to run extension cords into your home, which is both a fire and a safety hazard. Our kits are designed to be installed by qualified electrical personnel and meet the strict requirements of the National Electrical Code and the National Fire Protection Code. These kits are Listed to UL 67 by an independent lab for use in the USA. Unfortunately they are not approved for use in Canada. Made in USA .

This kit provides the safety for your home electrical system that you need to protect your investment. We offer Interlock kits to fit most panel boards including a full line of accessories to connect your portable generator to your home electrical system.

Your panel board is a distribution and protection system for electricity in your home. Power is fed from the utility into the panel. From here it is run across the different branch circuit breakers and out into the rest of your home. The Interlock kit allows you to safely disconnect your panel from the utility feed and switch it over to the generator which is being fed through a new generator breaker. The Interlock kit allows only one of these feed systems to be operational at the same time which prevents both sources from being connected together. Without an interlock or a transfer switch there is always a chance that someone could forget to open the main breaker resulting in a danger of electrocution to linemen, destruction of your generator and fire. For more on these risks see our safety page.

With this one connection you can now use anything in your home because all the circuits in your home can be activated through the breakers in your panel. It also eliminates running unsightly and potentially dangerous extension cords to various parts of your home and the need to plug and unplug appliances and lights.

Once the InterLock kit is installed it is quick and easy to transfer power from utility to generator in case of a power outage. And it is just as easy to return once the utility power has been cut back on, just reverse the procedure below.

1) Turn main breaker to the "OFF" position

2) Turn all branch circuits to the "OFF" position

3) Slide Interlock plate up (down in some kits)

4) Connect and start generator

5) Turn generator breaker to the "ON" position

6) Turn on essential circuits one at a time. Allow appliances to start before engaging next circuit

Note: Large loads such as water heaters, microwaves, dryer etc may not all be able to run at the same time. Breakers themselves do not use power unless something in the room that they feed has been cut on so it is fine to have the breakers that feed all the bedrooms, living room etc. on so that you will have the power available for lights and such as you need them. Check What I can run with my generator to see what can be run at one time with the larger loads.

If you have gas, oil, or propane heat you can run your furnace or boiler and keep warm. However if you have electric heat most generators under 10000 watts will not have the capacity to run it. That is the same for central air as well. The Interlock kit will handle any size generator though so if you have an electric heat pump or want to run your air conditioning unit then you should consider a 12000-watt or 15000-watt generator.

The back feed breaker is used for the generator input connection to the panel. To install the back feed breaker and interlock you will need 2, 3 or 4 free spaces (look in the panel requirements for your kit to find the number of free spaces you will need which is on the kit selection page) in your panel. If you do not have enough free spaces in your panel you will need to obtain one piggyback breaker for each space that you need to create. Piggyback breakers are sometimes called half-height breakers because they are manufactured with two breakers in the space that one breaker normally takes. However, they are normally available ONLY in 15 and 20 amp ratings. Please note that if you remove a 15 Amp breaker from your panel you should order a 15 Amp piggyback breaker to replace it. This also means that you should have another 15 Amp breaker somewhere in your panel to pair it with. If you are removing a 20 Amp breaker then the same should apply. If you need to pair a 15 Amp and a 20 Amp breaker then you should order a 15/20 Amp piggyback breaker. If you cannot free-up the necessary spaces then you CANNOT use these interlock kits.

In additional to the interlock kit we can provide the generator cord, outdoor power inlet box, generator load meters and utility power return alert as shown below. Items on this image are clickable.

Complete installation instructions are included with every kit. Kit comes with back plate, front slider plate, double-stick pads, screws, drill bit, thread lock and labels.

1) Disconnect power to panel.

2) Mount backing plate in proper position on panel cover with double-stick pads.

3) Remove panel cover.

4) Relocate branch breakers to free up necessary space for generator back feed breaker and interlock.

5) Install generator back feed breaker.

6) Install retaining strap around back feed breaker and label.

7) Drill 3 or 4 holes through panel cover using backing plate as a guide.

8) Remove burrs and file away spot of paint to allow for good electrical ground contact.

9) Install front slider plate with included screws.

10) Turn off generator and main breakers and re-install panel cover.

11) Test interlock for proper operation.

12) Apply thread lock to interlock screws.

13) Attach labels.

These kits should be installed, tested, serviced and maintained by qualified personnel. No responsibility is assumed by the manufacturer Generator Interlock Technologies, LLC or No Outage.com LLC for any consequences arising out of the misuse of this product.

The kit includes a specially designed back plate and front plate to fit the specific breaker panel, binder posts, binder screws, drill bit, thread lock, install instructions, labels for: main breaker, generator breaker, operating instructions, danger, retaining strap, retaining strap label. Click here for an image or a typical kit contents. Due to the wide variety of breakers available, the kit does not include the branch breaker that is used as the generator backfeed breaker. These are usually easy to purchase locally. The outdoor inlet box. building wire and generator cordset should be purchased separately.

These interlock kits are a perfect alternative if there is no room for a separate transfer switch or transfer panel on the wall next to your breaker panel, or on the outside of your house near the power company meter. These kits are Listed to UL 67 by an independent lab. However, these interlock kits DO require:

* modification of your load center breaker panel

* free branch breaker spaces

* proper installation and check of operation

Unlike many other breaker-based factory-built transfer switches, these kits are not functional when the front panel is removed.

Using these interlock kits to provide power to your whole breaker panel can result in overloading your generator. Damage to the generator and some appliance loads can result from these overloads. To avoid this possibility we recommend meters be installed on your generator feed to the panel. This will tell you how much load is being carried at any time and how much spare capacity is available for additional loads. With this information you can determine which branch circuits in your breaker panel can be turned on. Click here for our wide selection of generator meters.

During a power outage while the generator is powering your panel the main breaker will be off. Therefore you will have no way of knowing when utility power has been restored (unless you can easily see neighbors' lights come back on). We sell a low cost solution to this problem. See the PowerBACK™ utility power return alert module.

Source

Jeffrey Court

Jeffrey Court About Us

Pictured: Jeffrey Court Headquarters –, Norco, CA

Jeffrey Court’s story is one of entrepreneurial spirit, love of craft and dedication to innovation. Founded in 1991 by Jim and Janice Lawson, they set out to bring their love for hand painted tiles to the mainstream market.

In true innovator style the Lawson’s discovered a way to permanently affix hand-painted designs as decals on ready-made tiles. Needless to say Jeffrey Court tiles grew in popularity. Soon homebuilders were looking to include Jeffrey Court in their designer upgrade options. It was at that point that the Trade sale division of Jeffrey Court was born.

Today, Jeffrey Court now operates two distinct divisions, Trade/Designer and Retail Sales who’s combined SKU count is over 3,000. The retail division’s focus is a series of main-stream value driven products available through purchase only at The Home Depot®.

The Trade Sales Division focus is to bring cutting edge designer-minded products to the Architectural, Kitchen &, Bath, and Interior Design communities alike. Our product designers work with a litany of interior designers, product developers, and industry insiders to deliver the very best products possible for our end consumers.

Since Jeffrey Court’s founding the cornerstone by which our products are built upon is our commitment to three core values: (1) Timeless &, fashion forward design, (2) Constant product improvement, and (3) Dedication to our Trade &, Retail Partners Success. This has allowed us to become leaders in the industry by: smartly combining different decorative elements, having a keen eye for inspired design, and a wide assortment of in-stock decorative tile, stone, glass and metals elements.

Pictured: Main Warehouse –, Norco, CA

The Jeffrey Court Mission

Design and purvey the highest quality decorative tile, natural stone, metal, and glass elements that offer the best value possible for our customers.

Source

Wyse Terminals and Wyse Thin Client Devices

Wyse Thin Client Wyse -- Thin Client Devices and Dumb Terminals

Whether you're looking for Wyse Winterm thin clients or terminals (aka dumb terminals, green screens or general purpose terminals), you've come to the right place. Winterm thin clients deliver the productivity and application flexibility of a PC without the PC downsides of high service costs, low reliability, and short product life. Dumb terminals (aka green screens or general purpose terminals) are great, low cost units for data entry and retrieval. You can purchase Wyse terminals here at unbeatable savings, whether new or remanufactured.

The Wyse Dumb Terminal or Wyse Thin Client Device you need Right at your Fingertips

Questions? Call us at 800-457-8499 or e-mail for information and pricing on Wyse dumb terminal and thin client models.

The Best Wyse Terminals and Thin Clients You Can Buy

To order any of our new or Wyse terminals or Wyse Winterm Thin Client Terminals call us at 800-457-8499 or 440-953-1119 or e-mail us. Your purchase order, with credit approval, is welcome, as well as all major credit cards.

Source

Footed Pajamas For Girls

Footed Pajamas For Girls

Your "little angel" will sleep like a queen when she’s warm and cozy in her new footed pajamas for girls. Made from snuggly materials fit for a princess, she’ll love the feeling of being wrapped in a blanket when she wears her favorite pair of girls footed pajamas to bed. Finding the perfect pair is easy.

Girl’s Footed Pajamas Make Bedtime the Most Fun Time

Whether she loves princesses or ponies, you’ll always find the perfect pair of girls footed pajamas at CrazyforBargains.com. This style of sleepwear is amazing to help spark her imagination and get her ready for a world of incredible adventures as she drifts off to dreamland. When you read her a story before bed, find one with a princess that matches her footed pajamas for girls.

Next you can pair them with a crown and a cloak so she can pretend to be her new favorite heroine before bedtime. You can also buy matching girls footed pajamas for your angel and yourself to build a bond that lasts a lifetime.

When you have a matching set of footed pajamas for girls you can tell her to be brave like mommy and to not be afraid of the dark. The pjs can become a security that reminds her you’re only a room a way. This type of bravery only comes from a mother and daughter bond that can begin to form with your matching sleepwear.

Whether its girls footed pajamas with fun prints like frogs when reading about a fairytale prince, or a yellow set of girls footed pajamas and a curious monkey, the possibilities for helping her fall asleep with fun ideas and imaginative dreams are endless.

Whether she likes pink princess or purple penguins, we have the girls footed pajamas with adorable prints to help make bed time easier. When she’s happy to go to bed, you’re happy because life gets easier. Click any of the images above to discover her new favorite footed pajamas for girls and watch as bed time becomes one of the most fun times.

What Our Customers Say About Our Girls Footed Pajamas:

"This company is great. My daughter just love footsie pj's and we all know we can't buy them in the summer. or so I thought! I was able to get them and at a great price!" Tammy, NH

Source

Watch Tom Hanks Forrest Gump Rehearsal Footage UPDATE

Watch Tom Hanks' 'Forrest Gump' Rehearsal Footage [UPDATE]

Behold, here's Tom Hanks' "audition tape" for "Forrest Gump." Surfaced 20 years after the film's debut, this video shows Hanks reading opposite Robin Wright, who played Jenny. The tape also features the scene in which Jenny introduces Forrest to his son, Forrest Jr. played by a teeny tiny Haley Joel Osment. As Vanity Fair pointed out, Gump's trademark Southern accent is noticeably missing, but it's pretty easy to see why all these actors got the part.

Even the rest of the Kardashian clan is decrying this NBA baller's quickie marriage to their queen bee, Kim, as little more than an opportunity to get more famous. Well, it's working. How many basketball players can the average American woman name who aren't married to a Kardashian? (Hint: not many.)

Sometimes it's all about baby steps. Biel's five-year relationship with Justin Timberlake has arguably moved her from C-list status -- where she was was about to wallow in indies films once her "Hot Chick in Buddy Comedy Flicks" cache wore off -- to a solid B-list spot, despite having no major breakout roles.

By dating fellow social striver Jesse James (who moved a few notches up the fame ladder himself by marrying and cheating on Sandra Bullock) Von D has made herself a household name, and it's not because of her recently-cancelled TLC show, "LA Ink." Now that their engagement is back on -- we think -- they could soon be the Spencer and Heidi of the biker set.

K-Fed's investment of marrying Britney Spears and having two kids with her could have paid out more handsomely had he committed himself more fully to fame hunting. and hadn't already spread his portfolio a little thin with his prior kids with Char Jackson. Still, marrying Britney did move Kevin up to D-list fame from Z-list land, and will allow him to continue appearing in a slew of reality programs until the end of time.

Of the 16 mistresses alleged to have been involved in the downfall of professional golfer Tiger Woods in 2010, four have appeared in Vanity Fair magazine, three competed on Howard Stern's radio show for the crown of "Miss Mistress" and a prize of $,100,000 and one wrote a tell-all book. Also, one starred in a pornographic movie parodying her time with the golfer and another became a correspondent for the entertainment news show "Extra." Their investment was just their dignity, and the payoff was substantial. The one who invested the most time and energy, Rachel Uchitel (pictured above), has become a stalwart of reality television since the golfer's grand fall.

Elisabetta Canalis dated George Clooney for two years -- and all she got was a gig on "Dancing With The Stars."

Katie Holmes went from the girl on the "Creek" to an A-List celeb because she not only married Tom Cruise, but she had a baby with him. That's a very serious initial investment of capital that has paid off handsomely for her, as it did for Nicole Kidman before her.

Source

Who is Heather?

Who is Heather?

In a nutshell, Heather Thomson is a fashion designer, stylist, entrepreneur, reality TV show celebrity, philanthropist, and (last but not least) wife and mom. And she&rsquo,s all about inspiring women everywhere to look and feel their absolute best.

Heather started Yummie by Heather Thomson after her first baby. Like lots of new moms, she struggled to lose that baby weight. As she exercised and dieted, she also took a trip to the shapewear department looking for a boost of confidence.

What she found was anything but confidence boosting &ndash, unattractive garments that squeezed the life out of her. So she did what any good designer would do. She took to her sewing machine and went to work. That&rsquo,s when the patented 3-panel shaping tank top and a whole new way of looking at shapewear was born.

Since then, Heather has continued to evolve her brand. She&rsquo,s launched comfortable and sexy collections that are changing the definition of shapewear, and expanded into slimming clothing and flattering denim. She&rsquo,s brought Yummie by Heather Thomson a long way over nearly six years, and plans to take it a lot further.

And she has more than her fashion sense to help her reach those goals. She has over 15 years of experience working with celebrities who helped her grow personally and professionally. She was the founding Design Director for the Sean &ldquo,Diddy&rdquo, Combs line, and worked with Beyoncé, Knowles and Jennifer Lopez to create and launch their labels.

Heather is also committed to raising awareness for organ donation and is deeply involved with the New York Organ Donor Network. It&rsquo,s a cause near and dear to her heart, since her son Jax received a liver transplant as a baby. As an active board member of the Kellner Liver Foundation. she&rsquo,s committed to helping children get lifesaving medical treatment.

But mostly, Heather is a woman trying to do her best to balance work, family, and still have a little time for herself. You can get a peek at all her juggling on the new season of BRAVO&rsquo,s Real Housewives of New York City airing later this year.

Source

Nike Romaleo

Nike Romaleo

Reviewed on May 28th 2011

Updated on June 7th 2013

This Model Has Been Discontinued and Replaced with the New Nike Romaleo 2.

THE REVIEW:

The Nike Romaleo Weightlifting Shoe was released in 2008 as a direct competitor to the Adidas AdiStar model. Both models of shoes were released to coincide with the 2008 Summer Olympics, however, Adidas clearly won the marketing battle as we saw many more lifters sports the AdiStars than the Romaleos. That should come as no surprise since Adidas was clearly the market leader, having made shoes for Olympic weightlifting since the 1970′,s, and the Romaleo is technically Nike’,s freshman model of oly shoes. With that said, the Romaleo was a formidable alternative to other models of shoes.

For starters, the Nike has a different fit than Adidas models with a wider, more square shaped toe box. For those of us that can’,t wear narrower shoes due to wide feet, this makes the Romaleo a suitable alternative. The heel of the Romaleo is also proportional to the length of the shoe, a feature currently shared only by Risto brand shoes. I personally think that heel proportionality is a major feature that ALL Olympic lifting shoes should include since it helps ensure proper knee angle for each lifter, regardless of height.

As for durability, the Romaleo feature a synthetic upper that is extremely durable yet very soft and pliable. The result is a near zero break-in period required for these shoes. I have friends that have put more than 500+ training sessions on their Nike’,s and they still shoe no signs of noticeable wear. Some questions have arisen with regards to the longevity of the sole of the shoes. I’,ve received reports from lifters who say they’,ve trained 4-5 times a week for over three years and the rubber soles are still very much intact and don’,t appear to need replacing anytime soon.

The actual heel of the Romaleo is made of TPU and features the unique “,Power Bridge”, technology developed by Nike. Again, the heel is proportional to the shoe size and the inside sole of the shoe has a nice contoured heel cup that allows you foot to really sink into the shoe. The shoes also ship with two different inserts, one being a softer version for everyday training and the other a “,competition”, version that is extra rigid. I personally did not find the training insert very useful as it was totally flat and only functioned as a 1/8″, piece of cushion. While the Power Bridge is touted as a “,lightweight alternative to wooden heels”, we didn’,t really find this to be the case. The Romaleos were noticeably heavier than a same size Adidas Ironwork and AdiStar model and weighed in slightly heavier than the Risto Series 2 model. I think Nike could do better in terms of designing the midsole and heel.

While the Romaleos weight may be a setback, this can possibly be overlooked when you realize the comfort and extreme stability this shoe provides. The double meta-tarsal straps didn’,t really do much for me though and appear to be located in the wrong spot across the instep. Tightening them down does you really lock you into place and provide great lateral stability but I found that the top strap impeded my ankle flexibility some given its high placement on the instep. You can’,t deny the stability the shoe has when squatting though, its to the point where you almost feel as if you are wearing magnetic boots when lifting. Given the heel cup and wide toe box, people with mid to high arches should be able to wear these shoes without issue or need for orthotic inserts. And the pliability of the upper material leaves no weird feeling seams or uncomfortable creases when plantar flexing.

A unfortunate problem area for this shoe is in the design of the toebox and sole. The forefoot area is extremely stiff and requires a lot of use to loosen up to an agreeable level or resistance. This could be problematic for lifters that already have issue keeping their heels up when performing a split jerk and certainly isn’,t necessary for the toe-box to be that stiff.

Last but not least, the Nike Romaleo is one of the better looking model of weight lifting shoes on the market right now. Originally available in numerous different color variations, you are now pretty much limited to the white with black accent or solid black models. Although, I have seen a few stores still carry the anthracite and gold colors as well.

WHERE TO BUY:

We recommend getting your Nike Romaleos from VS Athletics as they tend to have the shoes in stock more often then other retailers and their customer services rocks.

Overall, I’,d say this is a good shoe but due to its excessive weight and lack of flexibility at the toe box you would be better off spending the extra $10 to get a pair of AdiStars.

  • Great stability
  • Wider fit
  • Well made
  • Too heavy
  • Inflexible forefoot area
  • Straps are a bit long
  • One of the more expensive models

ADDITIONAL SHOE FEATURES:

Source

Hilton Button

Hilton Button-tufted Curved Loveseat Details

ITEM#: 12737063

Modern meets retro with beautiful Hilton brown sugar loveseat. This curves chair features espresso stained wood legs with non mar foot glides for floor protection. The tufted backside and swanky, inverted arms of this Hilton loveseat lends your living room space a sleek, contemporary look. Position the loveseat in front of a vintage, Oriental rug to create an old-meets-new ambiance in your home's largest gathering space, or place the piece in front of a bay window to allow the natural light to cast a warm, soothing glow over the loveseat.

Customer Reviews Shipping &, Returns Shipping:

Usually leaves our warehouse in 1-2 business days. *

Standard Return Policy:

Items must be returned in new or unused condition and contain all original materials included with the shipment. More Details

FINAL SALE EXCLUSION: Items marked as FINAL SALE are not returnable unless the problem you experience is the result of our error.

This item cannot be shipped to Alaska or Hawaii. More details

Shipping Information:

Our standard shipping method is ground shipping. We also offer expedited shipping for most items. Your final shipping cost and estimated delivery timeframe will be available at checkout.

** Most Oversize orders are delivered within 1-4 weeks. Some orders may take 6 weeks to be delivered.

Source

Get to Know the Lantus - SoloSTAR - Pen

Lantus ®, SoloSTAR ®, pen prescription

for the program duration

Get Your Savings Now *,Certain restrictions apply.

See Savings Card for details when you enroll . US.GLA.14.05.082 Sign Up for your

Lantus ®, Savings Card

Prescription Lantus ®, (insulin glargine [rDNA origin] injection) is a long-acting insulin used to treat adults with type 2 diabetes and adults and pediatric patients (children 6 years and older) with type 1 diabetes for the control of high blood sugar. It should be taken once a day at the same time each day to lower blood glucose.

Do not use Lantus ®, to treat diabetic ketoacidosis.

Important Safety Information for Lantus ®, (insulin glargine [rDNA origin] injection)

Do not take Lantus ®, if you are allergic to insulin or any of the inactive ingredients in Lantus ®, .

You must test your blood sugar levels while using insulin, such as Lantus ®,. Do not make any changes to your dose or type of insulin without talking to your healthcare provider. Any change of insulin should be made cautiously and only under medical supervision.

Do NOT dilute or mix Lantus ®, with any other insulin or solution. It will not work as intended and you may lose blood sugar control, which could be serious. Lantus ®, must only be used if the solution is clear and colorless with no particles visible. Do not share needles, insulin pens or syringes with others.

Tell your doctor about other medicines, especially ones commonly called TZDs (thiazolidinediones), and supplements you are taking because they can change the way insulin works. Before starting Lantus ®,. tell your doctor about all your medical conditions including if you have heart failure or other heart problems, liver or kidney problems, are pregnant or planning to become pregnant, or are breast-feeding or planning to breast-feed. If you have heart failure, it may get worse while you take TZDs with Lantus ®,.

The most common side effect of insulin, including Lantus ®,. is low blood sugar (hypoglycemia), which may be serious. Some people may experience symptoms such as shaking, sweating, fast heartbeat, and blurred vision. Severe hypoglycemia may be serious and life threatening. It may cause harm to your heart or brain. Other possible side effects may include swelling, weight gain, injection site reactions, including changes in fat tissue at the injection site, and allergic reactions, including itching and rash. In rare cases, some allergic reactions may be life threatening.

Lantus ®, SoloSTAR ®, is a disposable prefilled insulin pen. Please talk to your healthcare provider about proper injection technique and follow instructions in the Instruction Leaflet that accompanies the pen.

Prescription Lantus ®, (insulin glargine [rDNA origin] injection) is a long-acting insulin used to treat adults with type 2 diabetes and adults and pediatric patients (children 6 years and older) with type 1 diabetes for the control of high blood sugar. It should be taken once a day at the same time each day to lower blood glucose.

Do not use Lantus ®, to treat diabetic ketoacidosis.

Important Safety Information for Lantus ®, (insulin glargine [rDNA origin] injection)

Do not take Lantus ®, if you are allergic to insulin or any of the inactive ingredients in Lantus ®, .

You must test your blood sugar levels while using insulin, such as Lantus ®,. Do not make any changes to your dose or type of insulin without talking to your healthcare provider. Any change of insulin should be made cautiously and only under medical supervision.

Do NOT dilute or mix Lantus ®, with any other insulin or solution. It will not work as intended and you may lose blood sugar control, which could be serious. Lantus ®, must only be used if the solution is clear and colorless with no particles visible. Do not share needles, insulin pens or syringes with others.

Tell your doctor about other medicines, especially ones commonly called TZDs (thiazolidinediones), and supplements you are taking because they can change the way insulin works. Before starting Lantus ®,. tell your doctor about all your medical conditions including if you have heart failure or other heart problems, liver or kidney problems, are pregnant or planning to become pregnant, or are breast-feeding or planning to breast-feed. If you have heart failure, it may get worse while you take TZDs with Lantus ®,.

The most common side effect of insulin, including Lantus ®,. is low blood sugar (hypoglycemia), which may be serious. Some people may experience symptoms such as shaking, sweating, fast heartbeat, and blurred vision. Severe hypoglycemia may be serious and life threatening. It may cause harm to your heart or brain. Other possible side effects may include swelling, weight gain, injection site reactions, including changes in fat tissue at the injection site, and allergic reactions, including itching and rash. In rare cases, some allergic reactions may be life threatening.

Lantus ®, SoloSTAR ®, is a disposable prefilled insulin pen. Please talk to your healthcare provider about proper injection technique and follow instructions in the Instruction Leaflet that accompanies the pen.

Source

How to Use Muriatic Acid in a Swimming Pool

Instructions

Bottle a sample of your pool water and have a pool supply store analyze it for chemical balance. Their computer will break down all components of your water sample and provide a detailed print-out for you. For the do-it-yourself types, pool test kits are available for home use.

Walk around the pool and slowly pour in the diluted acid. Leave the filter running. The acid neutralizes in approximately 30 minutes. Add the acid in the early mornings for best results.

Tips &, Warnings Resources More Like This

How to Keep a Freshwater Swimming Pool Clean

How to Clean Swimming Pool Pump Motors

You May Also Like

Often used to clean outdoor pavements, muriatic acid is extremely corrosive and highly caustic. Made of the same chemical elements as hydrochloric.

Muriatic acid, or hydrochloric acid, is used in swimming pools to lower the pH and total alkalinity of the pool water. Although.

Cloudy pool water is uninviting compared to sparkling, clear pool water. The cause of cloudy pool water is often a pH level.

If you have an above-ground pool with a vinyl liner, you must take special care when maintaining the pool. Additionally, if you.

Swimming pools are treated with chemicals to kill bacteria and maintain a pleasant appearance. In order to keep your swimming pool at.

You can avoid handling liquid muriatic acid in maintaining the chemical balance in your swimming pool by choosing pool sanitizers that don',t.

One of the ways to lower the pH balance of your pool water is to add muriatic acid. Other People. Muriatic.

Maintaining a proper pH balance is essential to the upkeep of a swimming pool. Levels should generally be kept between a 7.2.

There are several reasons why pool water might be cloudy, but if your pool water is clean and well filtered, then chances.

Swimming pools have a tendency to become dirty and stained for numerous reasons during the summer season. Leaving the pool uncovered is.

If you have experienced heavy rainfall recently or your pool has been used extensively, your pool',s pH level is most likely unbalanced.

Source

Auriculotherapy

Auriculotherapy is a health care procedure in which stimulation of the auricle of the external ear is utilized to alleviate health conditions in other parts of the body. While originally based upon the ancient Chinese practices of acupuncture, the somatotopic correspondence of specific parts of the body to specific parts of the ear was first developed in France. It is this integrated system of Chinese and Western practices of auricular acupuncture which is presented.

  • Auriculotherapy.com offers textbooks on auriculotherapy, wall charts, and equipment.
  • Seminar information for clinical training and certification in the practice of auriculotherapy.

  • Certification in auricular acupuncture can be found in the certification section for the Auriculotherapy Certification Institute.

  • Frequently Asked Questions for this website can assist patients and practitioners in answering a variety to queries on this topic.

  • The textbooks cited in the reference section list the most essential texts on auriculotherapy and ear acupuncture.

  • Research studies in the fields of auricular acupuncture are provided in the studies section.

  • Health care forms for clinical practice are provided free for all health care providers in a PDF format.

  • We welcome all questions, comments, and product orders from interested individuals.

    Source

  • Review: Nokian Hakkapeliitta R

    Call in the Cavalry

    Back in the 17th century, during the Thirty Years War in Central Europe, the tiny nation of Finland fielded a group of light cavalry called the Hakkapeliitta. Fighting for the King of Sweden, they were justly feared for their spectacular horsemanship, their utter ferocity and the blood-chilling battle cry, “Hakka Paale!” (“Hack them all down!”) from which they took their name.

    Nokian's Hakkapeliitta snow tires? Yeah, pretty much like that.

    Pros

    • Uncompromising winter grip.
    • Excellent dry-road performance.
    • Slushplaning technology.
    • Extremely low rolling resistance.

    Technology

    Nokian pioneered many of the technological advances that now show up in most of today's snow tires, such as the zigzag siping patterns cut entirely through the tread blocks, which were originally patented as the “Hakka Sipe.” Consequently, Nokian tires always pack a pretty big big technological punch, and the Hakkapeliitta R is no exception. One can begin with the unique canola oil/silica-based rubber compound which Nokian claims provides superior grip at low temperatures without using ecologically unsound volatile oils. Continue with the aggressive tread block design and new “Brake Booster” siping patterns designed to enhance braking power on slippery surfaces. In addition, the Hakka R sports a new siping style called “Pump Sipes” which places small voids beneath the sipes which draw in water as the tread block rolls down to keep it away from the contact patch, expelling it again when the tread block rolls upwards.

    Nokian is also a longtime leader at building tires with extremely low rolling resistance, such that independent testers have confirmed that the Hakka R has as much as a third less rolling resistance than many comparable tires. Low rolling resistance saves both fuel and treadwear, and over an expected tread life of 30,000+ miles, that kind of fuel savings can really add up.

    Handling

    Like their all-season cousin, the WR G2, Nokian Hakkapeliittas provide superlative, confidence-inspiring grip on snow and ice that make even notoriously winter-incapable cars like BMW coupes feel like four-wheel drive SUV's. Along with near-perfect straight-line grip, Nokian's engineers put a lot of thought and effort into lateral grip, something that other major tire makers are just starting to pay more attention to. Hakkas have by far the best lateral grip I have ever experienced, making it nearly impossible to fishtail the car even when deliberately trying to do so. Even in a full skid, slight reductions in throttle will usually allow the tires to recover by themselves with remarkably little driver input. Steering even in deep snow is stable and precise, as the aggressive tread cuts through ruts and other irregularities without a hint of tramlining or kickout.

    Hakkas are just as amazing in wet or slushy conditions. Braking grip on wet pavement is excellent, and hydroplaning is nearly nonexistent. Nokian is also the only snow tire maker in the world that puts serious full-time effort into preventing slushplaning, a condition that can be a real problem here in New England. On cold dry pavement, Hakkas are certainly not as good as Dunlop Graspics, but as good or better than any other dedicated snow tire I've driven. The steering feel is quite responsive with only a hint of sidewall flex and a low hum of road noise.

    The Bottom Line

    Nokians do tend to be somewhat more expensive than other tires. However, the low rolling resistance and accompanying fuel savings does compensate for at least part of that. For me, peace of mind easily compensates for the rest.

    One winter some years ago, my wife had to drive from northern Massachusetts back down to Boston the day after Christmas in the middle of a tremendous nor'easter that was busy dumping more than two feet of snow on us. “Don't worry,” she said to me, “I've got the Hakkas on the car.” Less than an hour later she came back. “You ran into something even the Hakkas couldn't handle?” I asked, quite surprised. “No,” she said “I was completely under control. It's just that nobody else on the road was. When I saw a Land Rover that couldn't track straight because all four tires were skating, I decided to turn back.”

    Yeah, pretty much like that.

    Source

    How to Lubricate an Overhead Garage Door

    Instructions

    Apply penetrating oil to the bearings on each door roller. Place the tip of the penetrating oil bottle near the base of the stem and the roller where you see the bearings. Rotate the roller wheel with your finger to distribute the oil.

    Set up a stepladder under the front torsion springs, if your door has springs on a torsion bar above the door. Spray the length of each spring liberally with the silicone lubricating spray. Open and close the garage door to work the silicone into the spring. Do not spray the cable drums for torsion springs.

    Tips &, Warnings References More Like This

    How to Insulate an Existing Overhead Door

    How to Install Wiring on Garage Door Sensors

    How to Lubricate an Elliptical

    You May Also Like

    Garage doors can stop moving properly, and even stick and squeak terribly, if the rollers are full of corrosion and rust. Inspecting.

    An overhead garage door has many moving parts, each serving different functions. While commercially prepared garage door lubricant is available, most parts.

    Garage doors have a number of moving parts that require lubrication to maintain proper and quiet operation. The hinges, chain, spring, and.

    Because an overhead garage door opener has a heavy workload, a sturdier lubricant than WD-40. While commercially prepared garage door lubricant.

    While some garage-door openers boast that they are maintenance-free, even chain-drive units that don',t call for lubrication require regular lubrication of the.

    Regular maintenance to the garage door. lubrication and will enable. features extension springs. Torsion-spring equipped garage doors allow.

    An overhead garage door has many moving parts, each serving different functions. While commercially prepared garage door lubricant is available.

    Without proper lubrication, a chain-driven garage door opener',s moving parts quickly wear out. Over time, dust and debris contaminates the grease lubricating.

    In addition to the chain maintenance, lubrication of the garage door. One way to keep your garage door operating smoothly is.

    Garage door openers have an average life expectancy of 10 to 15 years, according to the National Association of Home Builders. But.

    If your door gives you a squeaky greeting each time you open or close it, apply a bit of oil to the.

    How to Lubricate Garage Door Rollers, What to Use to Lube Garage Door Tracks, How to Make a Garage Door Fit Tighter.

    How to Take Down a Garage Door Torsion Spring. Lubricate the bearing on the left end as you did on the.

    Special garage door opener lubricant found at your local home improvement should be. Garage door springs can be a very dangerous.

    Source

    Get your free Yoplait coupons

    Free Yoplait coupon

    Yoplait coupons have changed the way people look at coupons today. This is due to the introduction of small coupons for commodities such as yoghurt, delights and lights. All these coupons are known to come with marvelous savings that can blow a customer’s mind away. Is there any freeYoplait coupon. This question will be answered in detail as the article unfolds. A good way to answer this question is to consider each and every Yoplait coupon, the offers that are associated with it and the terms and conditions that are attached as well.

    Is it possible for a coupon or a set of coupons to be free? Yes, it is possible. Some coupons may be sponsored so that customers may not have to spend anything at all. However, such coupons are for commodities that may not be bought if the coupons are not introduced. Companies usually use such coupons to get rid of commodities that have not been bought. The use of coupons is just to increase order as the commodities are being given out. Under normal circumstances, a coupon is not supposed to be free. After all, the ultimate goal of the coupon is to improve the sales and increase profit margins. Coupons are aimed at enticing people to buy more of a given commodity at a reduced price. Companies usually earn a lot from such business ventures because they earn more money within a very short period of time.

    The free coupon availabitlty

    If you fully understand the main reason why coupons are introduced, then you would obviously not look forward to coming across a free Yoplait coupon. You will be amazed to learn that there is none. This is because the coupons are meant to be bought at lower prices and then customers can use them to purchase the commodity that is associated with the coupon at a reduced price.

    You can get Yoplait coupons from any website including the official website for Yoplait. The free Yoplait coupon will not be found. What you will come across are coupons that can enable you to purchase Yoplait products at reduced prices. An example of the coupons that you can purchase at much reduced prices is the yoghurt coupon for Greek yoghurt. This coupon can enable you to purchase Greek yoghurt at just $0.75 for every two cups. This is an offer that you cannot obviously deny if you really love the highly nutritious Yoplait Greek yoghurt.

    Although there is literally no free Yoplait coupon, there are plenty of free offers that come with coupons. For example, you are at liberty to go and get a print out of the coupons from Yoplait’s official website or any other legitimate website for free. Once you have the print out of the coupon, you will be entitled to remarkable reduced prices for every purchase of the commodity that is on the coupon. In addition to free coupon print outs, you can also get free updates on upcoming coupons, any extensions of deadlines or any alterations to the pre-existing coupon.

    Source

    Pearlescent paint

    As we all know, Custom Painting on any surface can seem like a challenge whether one is a seasoned professional or a novice. Creating pearl paint is as easy as doing any other type of paint, with the exception of adding a few steps to the process. When we describe Ghost Pearls on our site, we are speaking of the type of pearlescent pigments that can be used to create ghost flames, entire irridescent pearl paint jobs, or other ghost effects. Our ghost pearls are what custom painters use to create those beautiful pearlescent effects that people see on many custom paint and even factory paint jobs. Newer cars and motorcycles can be seen with ghost pearl effects done in the factory, such as the Lamborghini orange paint with the beautiful gold pearl that we see at the auto shows, or simpler pearlescent white paints that we see on new Cadillacs or Infiniti cars, which can be acheived with a simple silver ghost pearl or gold ghost pearl applied over a white base coat. Turning a two-stage paint job into a three-stage paint job is the basic step in creating a quality pearl paint .

    With this thought in mind, anyone can make an ordinary paint job into a pearl paint job. Instead of doing a base-coat clear-coat paint job, we add the pearl paint into the middle of the mix. Base-coat, ghost pearl paint. clear-coat. We always recommend that people make their own mixes and spray a test panel before doing the entire project, and it is always wise to use a base clear, or a binder to mix the pearls with before adding the final clears. The final clear step is only recommended for custom paint, and not for powder coating. gel coating, or faux finish. If you are looking to do a project using these beautiful ghost pearls, we have a few suggestions on which colors look good over which base coats.

    White base coat: Use any of the ghost pearls, but keep in mind that the red ghost pearl will give you a irridescent pink look in the sun. Blue, violet, orange, gold and silver are the most popular colors for white base coats.

    Black base coat: You also may use any of the ghost pearls. but keep in mind that using too much will make the project take on the color of the pearl and overwhelm the black. To get a cool midnight color change effect, keep the ratio of pearl down to about a teaspoon per quart in the clear base or binder. In powder coating. keep the ratio down to a tablespoon per pound and add onto that as needed.

    Red, Burgandy, or Orange base coat: We highly recommend any of our Gold ghost pearls, including the shimmer gold or the satin gold. Also, Blue pearl red pearl, and violet pearls can make for great effects over the darker shades of red.

    Blue base coats: For very light blues (like cornflower blue), we have seen excellent results using gold ghost pearl, but for a cool color shift on any shades of blue, a violet ghost pearl will give you a cool purple color shift in the sun. Silver ghost pearl paint can also give a nice subtle effect to the darker blues. Green can give an awsome pearl effect over most blue bases as well.

    Yellow base coat: We highly recommend that you try using green ghost pearl for the lemony yellows, and gold ghost pearl for the darker racing yellows.

    Green base coat: Gold ghost pearl looks great on green base coats. We have also seen good results with orange and red ghost pearls.

    Pink base coat: Believe it or not, you will find that silver ghost pearl looks awesome over pink, as does the red ghost pearl.

    Purple base coat: Try our Red Ghost Pearl, Green Ghost Pearl, or Silver Ghost pearl.

    If you are still confused over which products would look good over your existing paint, or want to discuss your options, contact us!

    Source

    Lanc - me HYPN - SE

    Lancô,me

    Certain items considered Hazardous Materials (HAZMAT) including aerosols and alcohol-based products (e.g. pressurized spray cans, hairspray, nail polish remover, nail polish etc.) are required by the U.S. Department of Transportation to be shipped by Ground-only transport, due to air transport restrictions and regulations. For these shipments, you will need to choose UPS Ground, or USPS Ground in Checkout, for shipments in the continental United States. For P.O. Box addresses, USPS Ground is the only shipping method available. Regrettably, these items cannot be shipped to either Alaska or Hawaii.

    This item is restricted from shipping to California addresses.

    International Shipping Information

    Sephora offers the following flat rate international shipping costs.

    Guaranteed all-inclusive costs (no additional fees at delivery)

    Germany: €10 EUR on orders over €75 EUR

    Japan: ¥1,500 JPY on orders over ¥10,000 JPY

    South Korea: ₩15,000 KRW on orders over ₩100,000 KRW

    United Kingdom: £6 GBP on orders over £75 GBP

    For orders under the stated threshold above, actual shipping costs are charged, these costs will vary by country and order size.

    Restricted Hazardous Items

    Source

    Is Pepsi Clear the return of Crystal Pepsi?

    Is Pepsi Clear the return of Crystal Pepsi?

    Hello there! Keep up with our beverage reviews by following BevReview on Facebook and Twitter

    Update 12/31/2010: It would appear that Pepsi has abandoned their trademark claims on "Pepsi Clear" and "Diet Pepsi Clear", per the US Patent and Trademark Office. That would seem to put the nail in the coffin for the return of this beverage.

    Back in July. we were doing some trademark searches to see what might be found in the world of new beverages (much the same way we discovered Diet Mountain Dew Ultra Violet ).

    Of interest were these two filings from PepsiCo:

    Pepsi Clear (77553297 )

    Filing Date: August 22, 2008

    Published for Opposition: December 30, 2008

    Filing Date: August 22, 2008

    Published for Opposition: December 30, 2008

    Date of Status: March 24, 2009

    So what's the big deal, this is the old Crystal Pepsi from 1992-3, right? Actually, nope! What's different with the above trademark filings is that they are currently live in the USPTO database. The old Crystal Pepsi trademarks (74321835. 74321837 ) for "Clear Cola Crystal Pepsi" have been abandoned and are dead.

    (Source: Wikipedia)

    So what does this mean? Is this the return of Crystal Pepsi? Who knows. We're just presenting the information here…, though the trademark filings and tweets from our friends at Salute To Soda might hint that direction (Emphasis ours):

    Regarding the name Pepsi Clear, it's not entirely new. For a short time in 2005 or so, a product named Pepsi Clear was marketed in Mexico as a transparent cola, but that appears to no longer be available. However, it is a product that has the same name as what is currently showing up in the trademark searches.

    Screenshot of Pepsi Clear contest website used in Mexico

    (Source: pepsi.com.mx)

    Translation of website text via Google:

    Win a kit Clear Pepsi …, The only drink cola, transparent.

    All you have to do is answer simple trivia about Pepsi Clear, and if you are one of the first to answer correctly, be one of the winners!

    To participate you must be registered at www.pepsi.com.mx. Even if you do not win, enter your data and participate in all our promotions.

    Pepsi Clear advertisement used in Mexico

    (Source: pepsi.com.mx)

    Which leaves us not a lot to go on, so we might as well just remember the Crystal Pepsi era, whether or not it returns again. For those who don't remember, here's an excerpt from Wikipedia :

    Crystal Pepsi was a soda made by PepsiCo from 1992 to 1993. It was marketed as a caffeine-free "clear alternative" to normal colas, equating clearness with purity and health. Its marketing tagline was "You've never seen a taste like this". However, the taste was not significantly different from other colas, unlike other colorless soft drinks, which usually have a lemon-lime flavor, Crystal Pepsi tasted much like the original Pepsi.

    In 1992, the product came to test markets in Denver, Colorado, Sacramento, California, Dallas, Texas, and Providence, Rhode Island and had a positive response. Pleased with the results, PepsiCo launched the cola on April 13, 1992, and began to sell it nationwide in 1993. A series of television advertisements featuring Van Halen's hit song "Right Now" premiered on national television on January 31, 1993, during Super Bowl XXVII. In its first year, Crystal Pepsi captured a full percentage point of U.S. soft drink sales, approximately $474 million. Coca-Cola followed suit by launching Tab Clear on December 14, 1992.

    Initial sales were good but quickly fell. Pepsi pulled the drink off the market and returned several months later with a reformulated citrus drink titled "Crystal From Pepsi", but this was short-lived as well.

    Bus with Crystal Pepsi advertising

    (Used by permission via spudart.org )

    Crystal Pepsi Memories

    Do you remember Crystal Pepsi? What are your memories of that uniquely clear drink? Post them in the comments and share them with others! Here's one to start things off from BevReview reader BJ Wanlund:

    When I had that first Crystal Pepsi, it was unlike any other drink I have ever had before or since. I took one sip, and almost thought I was in heaven. This incredible clear cola was unlike any soda I'd ever tasted, either before or since that time.

    Source

    Staircase and Balcony Railing Kits For Interior

    Staircase and Balcony Railing Kits For Interior

    Please refer to our privacy policy for contact information.

    Updated December 10, 2014.

    You're building stairs and you need railing for the staircase itself, as well as landings, balconies, and other associated dangerous dropoffs.

    The coolest option is for your local woodworker to build and install custom railings. Wouldn't we all like that? I've priced out this project with local craftsmen, and while I believe the cost is worth it, I'm not ready to pay that price.

    What about staircase railing kits? You'll find no shortage of railing kits for exterior (decks), but a far smaller pool of products for interior. Here are the fruits of my labors:

    (See Bottom of Page for Stairs Terminology)

    StairSimple Axxyx. ©, StairSimple

    &bull, StairSimple Axxys Stair or Level Rail Kit

    Axxys kits consist of an 8 foot run of hemlock railing, base, 15 metal balusters, 30 pivoting connectors, 2 hand rail connectors. With kits running around $224, Axxys is one of the cheapest stair railing kits you can buy.

    Source

    2011 Nissan NV1500

    2011 Nissan NV1500 / NV2500 HD / NV3500 HD Japan creates its own Mercedes Sprinter, and it’,ll be built in America.

    There&rsquo,s nothing terribly creative about the name of Nissan&rsquo,s new commercial van&mdash,NV stands for Nissan Van&mdash,but the Japanese Sprinter-fighter is a fresh take on the commercial carryall box. Nissan will launch the van in three strengths with a choice of a V-6 or V-8 engine.

    The NV is a clean-sheet design, Nissan claims it spent five years researching the commercial-vehicle market to come up with the slab-sided, space-efficient package you see here. The NV has body-on-frame construction and doghouse-less powertrain packaging&mdash,for more interior room and easier servicing&mdash,as well as mobile-office interior features like a flat-folding passenger seat that can do desk duty, an optional removable center console, and plenty of nooks, pockets, and cubbies to stash the tools of the trade.

    The lighted cargo area behind the two front seats has a floor length of 120.7 inches, a max width of 70.3 inches, and a height of 55.4 inches with the standard roof or 76.5 with the optional high roof, which is designed to allow (almost) anyone to stand up and work in the back. Nissan definitely kept upfitters in mind: there&rsquo,s a no-drill roof-rack mounting system, weld-nut attachment points for interior shelving and racks, and optional pre-wiring for extra electricity-needing accouterments.

    Three models will be available&mdash,NV1500, NV2500 HD, and NV3500 HD, information on their differences and equipment is coming later. All will be available with the standard roof, while the high-roof option will be limited to the 2500 and 3500 vans. Nissan&rsquo,s 4.0-liter V-6 will be the base engine and its 5.6-liter V-8 will be optional, both paired with a five-speed automatic transmission. No power figures were quoted for this application. We&rsquo,ve seen 261 hp from the V-6 Frontier and 317 hp from the V-8 in the Titan and expect similar, if not identical, numbers for the vans.

    While it&rsquo,s not quite as funkadelic looking as the NV2500 concept from 2008, the NV has a decidedly foreign look to it, more Sprinter than Ford E-series, although the grille is definitely Ford-esque. All of the special features aside, we think the availability of a powerful, modern V-8 will be the big differentiator between the NV and our current big-van favorite, the Mercedes-Benz/Freightliner Sprinter.

    The NV will be built at Nissan&rsquo,s Canton, Mississippi, plant and is scheduled to arrive toward the end of the year. Nissan has promised some more commercial vehicles as well, so we may soon be seeing something in the Ford Transit Connect size range or possibly a chassis-cab version of the NV.

    Other Stories You Might Like

    Source

    Attic Insulation

    Attic Insulation Reflective Attic Insulation How does reflective attic insulation stop heat flow?

    The nearly indestructible metalized polyethelyne attic foil insulation from Eco Foil.com is made with 99% pure aluminum. The aluminum in the attic insulation foil works to reflect radiant heat away and back toward the source. Pairing high quality attic radiant barrier insulation with traditional fiberglass or cellulose insulation is the best attic insulation combination to maximize the energy efficiency of your attic space. Reflective attic insulation can also improve the performance for an attic-based HVAC system. For maximum impact from installing attic foil insulation, attic retrofits are the way to go.

    What makes EcoFoil attic insulation the right product for your attic insulation?
    • Ecofoil attic insulation is durable and safe - this radiant barrier is the first to pass the ASTM E84-2009 test as a Class 1/Class A flame retardant radiant barrier. People consider EcoFoil the best attic insulation as it is virtually indestructible and impossible to tear, yet this type of attic insulation does not require special clothing or breathing equipment to install and reflective attic insulation leaves no debris behind when you insulate attic ceiling spaces.
    • Radiant barrier attic insulation is an economical addition to your energy savings strategy. Attic insulation foil is easy to install and can be an afternoon DIY project for 1-2 people. Just cut a length of the attic insulation foil with standard scissors, roll the radiant barrier insulation over the face of your attic rafters and staple into place with a manual or pneumatic staple gun.
    • EcoFoil attic foil insulation is the most reflective attic insulation of its kind reflecting 97% of radiant heat when installed with adequate air space on one or both surfaces. What is the best attic insulation? EcoFoil.
    • Attic foil insulation is waterproof and non-absorbent, EcoFoil attic insulation does not enable growth of mold or fungi (ASTM C1338-08) and pinpoint perforations prevent condensation build up in attic spaces.
    Attic insulation - "Under Rafter" method

    In warm summer months attic temperatures can reach as high as 140° Fahrenheit. The heat from your attic tries to invade your cooled living space, making your air conditioner work harder to keep your house at the desired temperature. Radiant barrier attic insulation installed under the rafters in your attic reflects up to 97% of the sun's radiant heat away from your attic. This method of installing attic insulation keeps your attic temperature lower, requiring less effort from your air conditioner. This attic insulation installation takes a few hours and in hot months you should see an immediate change on your energy bill. Some of the most common cities using reflective attic insulation are Atlanta, Georgia, Houston, Austin and San Antonio, Texas, Florida, and Phoenix, Arizona. Download our installation guide for installing attic radiant barrier- under rafter method.

    Attic insulation - "Over Joist" method

    During cold winter months, 50-75% of your home or building's heat can be lost through your attic area due to radiant heat transfer. Fiberglass and cellulose blow-in insulation in attics only slow down heat transfer and do nothing against radiant heat gain or loss. Fiberglass and cellulose insulations absorb and retain heat, but will eventually transfer the heat to cooler air outside the attic roof insulation. Attic radiant barrier reflects up to 97% of radiant heat back toward the living space, keeping your home warmer and saving you on heating costs. Installing radiant barrier attic insulation is clean, quick, and easy with our EcoFoil Perforated Radiant Barrier product. Just roll the reflective attic foil insulation across the attic floor right over top of any existing insulation and and don't place anything directly on top of it (a minimum 3/4 inch air space is required to reflect heat.) This combination is the best insulation for attic spaces that aren't used for storage to minimize heat transfer. Download our installation guide for installing attic radiant barrier over an attic floor .

    Ready to start seeing savings on your energy bills? Make it a do it yourself attic foil insulation project this weekend.

    Want to the attic radiant barrier cost? Use our radiant barrier attic insulation cost calculator to see how much EcoFoil you will need for your attic. Simply enter your home's dimensions and select which installation method (or choose both) to see how much EcoFoil reflective attic insulation you will need. EcoFoil ships within one business day, so you can install it and start seeing energy savings in a week or less in the continental U.S..

    Have questions? Talk to one of our radiant barrier attic insulation experts: (888) 349-3645. Looking for even more savings? Consider radiant foil bubble insulation for your HVAC duct system as well.

    Source

    Heartworm Medication Part 1: Truths, Omissions and Profits

    Heartworm Medication Part 1: Truths, Omissions and Profits

    Heartworms are Spread by Mosquitoes.

    Heartworm Meds are Spread by Fear.

    It’s getting warmer outside — time for sellers of heartworm medications to start scaring you to death.Television and print ads, which used to push meds only during warm summer months, now urge you to keep your dog on medication year round. The question is: why the change?

    Drs. David Knight and James Lok  of the University of Pennsylvania School of Veterinary Medicine, addressing recommendations for year round meds, warned:  “The practice of some veterinarians to continuously prescribe monthly chemoprophylaxis exaggerates the actual risk of heartworm transmission in most parts of the country and unnecessarily increases the cost of protection to their clients.”

    So, is the change to year round meds all about money? Or is there more to this story?

    Heartworm “prevention” is a major health decision for pet parents and  multi-billion dollar Big Business for drug companies, veterinarians, testing laboratories and on-line sellers of medication. When health intersects money, there’s a lot of room for conflict of interest. Only by understanding the business aspects and the truth about heartworm transmission can you make an informed decision about if, how and when to protect your dog with commercial products.

    While everyone agrees that heartworm infestations can be life-threatening, infestation is far from inevitable nor is it the immutable death sentence advertisers would have you believe. (Otherwise, all dogs and cats not on meds would die of infestation. But they don’t.)

    Every holistic vet I’ve consulted had concerns about the long-term safety of heartworm medications. Well-known vet, author and columnist Martin Goldstein wrote in his wonderful book The Nature of Animal Healing  that he sees heartworms as less epidemic than the “disease-causing toxicity” of heartworm medicine.

    Dr. Jeff Levy. vet and homeopath, concluded “that it was not the heartworms that caused disease, but the other factors that damaged the dogs’ health to the point that they could no longer compensate for an otherwise tolerable parasite load.” Those factors include, “… being vaccinated yearly, eating commercial dog food, and getting suppressive drug treatment for other symptoms….”

    Heartworm meds do not, by the way, prevent heartworms. They are poisons that kill  heartworm larvae (called microfilariae) contracted during the previous 30-45 days (and maybe longer due to what is call the Reach Back Effect ).

    The heartworm industry authority, The American Heartworm Society  (and their cat heartworm site ) offers a wealth of information. Their website is a public service but also  a marketing tool aimed at buyers and resellers of heartworm meds. Sponsors of this website are a Who’s Who of drug companies. Fort Dodge Animal Health (Wyeth), Merial and Pfizer are “Platinum Sponsors.” Bayer merits Silver. Novartis, Schering-Plough, Virbac and Eli Lilly get Bronze. Most of these companies have sales reps that regularly call on vets and show them how to sell you heartworm meds. With any purchase of any drug, we recommend you ask for information regarding possible adverse effects, the necessity for taking this drug and available alternatives.

    How Heartworms Infect Dogs: It’s Not Easy!

    Well, now that we’ve looked behind the scenes of the heartworm industry. let’s take a look at how the heartworms themselves (called Dirofilaria immitis) do business. Seven steps must  be completed to give your dog a dangerous heartworm infestation:

    Step 1: To infect your dog, you need mosquitoes (so you need warm temperatures and standing water). More specifically, you need a hungry female  mosquito of an appropriate species . Female mosquitoes act as airborne incubators for premature baby heartworms (called microfilariae). Without the proper mosquito, dogs can’t get heartworms. Period.

    That means dogs can’t “catch” heartworms from other dogs or mammals or from dog park lawns. Puppies can’t “catch” heartworms from their mothers and moms  can’t pass heartworm immunity to pups.

    Step 2: Our hungry mosquito needs access to a dog already infected with sexually mature  male and  female heartworms that have produced babies.

    Step 3: The heartworm babies must be at the L1 stage of development  when the mosquito bites the dog and withdraws blood.

    Step 4:  Ten to fourteen days later — if the temperature is right –the microfilariae mature inside  the mosquito to the infective L3 stage then migrate to the mosquito’s mouth. (Yum!)

    Step 5:  Madame mosquito transmits the L3′s to your  dog’s skin with a bite. Then, if all conditions are right, the L3′s develop in the skin for three to four months (to the L5 stage) before making their way into your dog’s blood.  But your dog still isn’t doomed.

    Step 6:   Only if the dog’s immune system doesn’t rid the dog of these worms do the heartworms develop to adulthood.

    Step 7:   It takes approximately six months for the surviving larvae to achieve maturity. At this point, the adult heartworms may produce babies if there are both males and females, but the kiddies will die unless a mosquito carrying L3′s intervenes.  Otherwise, the adults will live several years then die.

    In summation, a particular species of mosquito must bite a dog infected with circulating L1 heartworm babies, must carry the babies to stage L3 and  then must bite your dog. The adult worms and babies will eventually die off in the dog unless your dog is bitten again!  Oh, and one more thing.

    Heartworms Development Requires Sustained Day &, Night Weather Above 57˚F

    In Step 4 above I wrote that heartworm larvae develop “if the temperature is right.”

    The University of Pennsylvania vet school (in a study  funded by Merial) found: “Development in the mosquito is temperature dependent, requiring approximately two weeks of temperature at or above 27C (80F). Below a threshold temperature of 14C (57F), development cannot occur, and the cycle will be halted. As a result, transmission is limited to warm months, and duration of the transmission season varies geographically.”

    Knight and Lok agree: “In regions where average daily temperatures remain at or below about 62˚F (17˚ C) from late fall to early spring, insufficient heat accumulates to allow maturation of infective larvae in the intermediate host [the mosquito], precluding transmission of the parasite.”

    The Washington State University  vet school reports that laboratory studies show that maturation of the worms requires “the equivalent of a steady 24-hour daily temperature in excess of 64°F (18°C) for approximately one month.”  In other words, it has to be warm day AND night or development is retarded even if the average  temperature is sufficiently warm. They add, that at 80° F, “10 to 14 days are required for development of microfilariae to the infective stage.”

    Jerold Theis. DVM, PhD, says, “If the mean monthly temperature is only a few degrees above 14 degrees centigrade [57 degrees F] it can take so many days for infective larvae to develop that the likelihood of the female mosquito living that long is remote.”

    I have never found this temperature-dependent information on a website promoting “preventatives,” but only in more scholarly works not easily accessed by the public. There is, as far as I can find, only one mention of temperature on the Heartworm Society (on the canine heartworm page ) and none in the Merck/Merial Veterinary Manual site or Merial’s heartworm video — even though Merial funded the UPenn study.

    The Society  also reports, “Factors affecting the level of risk of heartworm infection include the climate (temperature, humidity), the species of mosquitoes in the area, presence of mosquito breeding areas and presence of animal reservoirs (such as infected dogs or coyotes).”

    Source

    Auto Sunroof Repair, Replacement - Installation

    Auto Glass Repair and Replacement, Car and Auto Sunroof Repair and Moonroof Replacement Experts

    Auto Sunroof Repair by Houston auto sunroof repair and replacement specialist. Convenient and fast auto sunroof repair and auto sunroof replacement, auto glass repair and windshield replacement in Houston and the surrounding areas. With our years of auto glass, sunroof and moonroof knowledge and experience, we provide professional aut sunroof glass, vent glass, rear glass and door glass repair and replacement with friendly customer service.

    Our Houston Auto Sunroof Repair and Replacement Guarantee

    • We unconditionally guarantee all auto sunroof repairs and replacements
    • We give you free upfront price quote/estimate on ALL auto sunroof repairs. No surprises.
    • We repair and replace sunroofs for all cars, vans, SUV and trucks – all makes and models
    • We help arrange a tow truck to tow your vehicle to our shop if you need one.
    • We drop you off at your work or office and pick you up when your vehicle is ready – FREE
    • We deal with your insurance company so you do not have to – saving you valuable time
    • Call us now at  281-661-8180  today to see how much we can save you on auto sunroof installation

    Hollandia 700‐II Comfort power inbuilt auto sunroofs are designed with quality and innovation in mind,by Ramys Garage

    Auto Sunroof Repair –, What We Do

    • AUTO SUNROOF REPLACEMENT - We replace all auto sunroofs
    • AUTO SUNROOF REPAIR –, We repair all auto sunroofs and moonroofs
    • AUTO GLASS REPLACEMENT –, We replace auto windshields and glass
    • AUTO MOONROOF-GLASS REPAIR - We repair all auto moonroofs
    • AUTO SUNROOF GLASS REPAIR- We replace sunroof glass
    • AUTO SUNROOF -AFTERMARKET REPAIR  -  We use OEM and factory approved parts
    • CAR SUNROOF-AFTERMARKET REPLACEMENT –, We use factory approved parts 
    Ramy’,s Garage –, Auto Glass Service Ramy’s Garage Auto Sunroof Repair

    As auto sunroof repair shop, we install, repair and replace sunroofs. Ramy’s Garage is your One Stop Shop for Sunroof Repair or Replacement. If your sunroof glass needs repair with any of following issues: has a seal issue, water leaks, air noise, were vandalized, theft recovery, the motor is stuck, or you’re not sure what is wrong with your sunroof. give us a call at 281-661-8180. We can repair it!

    Auto Sunroof Repair Services:

    • Repair Broken Auto Sunroof Glass
    • Replace Auto Sunroof Motors
    • Align Sunroof Glass Assembly
    • Replace Sunroof Track Assembly
    • Replace or Recover Sunroof Sunshades
    • Replace Headliners or Re-cover
    • Replace Auto Sunroof Switches
    • Trouble Shooting and Diagnosing
    • Install Original Factory Sunroof and Moonroof Parts
    • Install After-Market Sunroof and Moonroof Parts
    • Repair Clogged Sunroof Hoses
    • Service Sunroof Assembly’s
    Auto Sunroof Repair

    Love your sunroof, but hate the leaks? Our auto sunroof repair specialists can help. We offer sunroof glass replacement and repair as part of our comprehensive auto glass replacement services. Specializing as an auto glass shop since 1957, our team brings you more than 54 years of experience repairing and replacing sunroofs in all types of cars and trucks. When you want the job done right, you can rely on our professionals for sunroof repair that will stand the test of time. So if your sunroof glass is cracked, if your moonroof seal doesn’t keep the rain out anymore, or if you’re experiencing just about any other problem with your sunroof, Ramy’s Garage Sunroof Repair can provide the services that you need. For your free estimate or if you have questions or concerns about your repair needs call us today! 281-661-8180 .

    Already have an electric sunroof? No matter what make or model of your car, truck, SUV or van,our auto sunroof professionals can repair most problems with factory installed electric sunroofs. From a broken sunroof glass to a broken track and rail assembly, Ramy’s Garage Sunroof repair can make your broken sunroof new again. As your full-service auto glass shop in Houston,Texas, weare well-versed in sunroof repair and replacement. Our team is skilled in resolving a wide variety of issues with your sunroof.

    Source

    The Birkie Trail

    The Birkie Trail

    The 107 kilometer Birkie Trail system attracts skiers, runners, bikers, trekkers, and hikers, from casual day-trippers to elite superstars.  The Birkie trail was built for all silent sports enthusiasts to enjoy. The non-profit 501(c)(3) American Birkebeiner Ski Foundation maintains 100% of the trail system.  Donations to help cover the annual maintenance costs are welcome. You can help with a personal donation which may be tax deductible (consult your tax professional) and by joining the Foundation .

    Ski Trail Passes Trail Maps Latest Trail Report

    1.4.2015 (7:45am) :  We waited until early, early this am since the snow was coming –, but it didn’,t…,so we did get the skate lanes redone from “,OO”, north to the Firetower food station on both the classic and skate trails, including Birkie Ridge.  Dress warm and enjoy!           - chris and the groomers

    1.3.2015 (1:00am) :   Groomed from “,OO”, south to Fish Hatchery park.  Set a track where we had enough base.  Enjoy the skiing!         - chris and the groomers

    1.2.2015 (7:00am):   From “,OO”, north  we have groomed to the Powerlines –, both the skate and classic trails including Birkie Ridge connector (and all the loops at “,OO”,).  South of “,OO”, we groomed down to Mosquito Brook. (due to mech. issue we couldn’,t finish to Hatchery)   - chris and the groomers

    1.1.2015 (7:00am ):   Groomed the skate lanes (classic tracks very firm from cold weather and in good shape so didn’,t reset) from OO north on the Birkie Skate trail to the Powerlines.  Groomed the Classic trail from OO north to Fire Tower food station.  Groomed the OO loops as well.  Tonight we will groom south 1/2 of trail.  Enjoy the skiing.  Happy New Year!         - chris and the groomers

    Source

    KMC XD Rockstar 2 Rims

    Turn your car from Zero to Hero with the best deals on wheel and tyre packages. Amazing KMC XD Rockstar 2 Rims For Sale at Ozzy Tyres

    Ozzy Tyres has been one of the leading forces in the wheel and tyre industry for the past 20 years.

    It’,s with this experience that you can be sure you’,ve come to the right place for all you KMC XD Rockstar 2 Rims’, needs.

    When you are looking for KMC XD Rockstar 2 Rims,  ensure that you make Ozzy Tyres your first choice as we have quality products, source from around the world, at the best prices in Australia.

    We guarantee that you will be impressed by the KMC XD Rockstar 2 Rims  at Ozzy Tyres .

    Inquire About KMC XD Rockstar 2 Rims and Visit Our Online Store

    Ozzy Tyres  stocks some of the biggest, most popular wheels brands in the world.

    One Of these brands is the American 4×,4 wheels giant, KMC Wheels!

    KMC, with the help of their KMC XD Rockstar 2 Rims , is a wheel brand with personality!

    All Ozzy Tyres KMC wheels fit all kinds of cars. including 4WDs and utes.

    KMC also accommodates to all kinds of finishes including chrome, machine face and matte black.

    KMC XD Rockstar 2 Rims   has been one of their absolute best sellers and also ours!

    With its’, intimidating bold look and the sheer size, the KMC XD Rockstar 2 Rims  are your best option if you want to make a statement.

    Ozzy Tyres   stocks KMC XD Rockstar 2 Rims in matte black, machine face and chrome and with sizes including 17×,8, 18×,9, 20×,9.

    Benefits Of Choosing Ozzy Tyres
    • Affordable Prices
    • Discounted Delivery Australia Wide
    • Nuts and Bolts
    • Fitted And Balanced
    • Friendly Customer Support
    • Trusted Name
    • 20 Years Industry Experience
    • Highest Quality Mag Wheels And Tyres
    • Call To Find Out More 1300 699 699

    Ozzy Tyres   sells the best KMC XD Rockstar 2 Rims anywhere in Australia, don’,t miss out on this amazing opportunity to grab yourself a bargain.

    We have friendly staff to help you with all your KMC XD Rockstar 2 Rims   needs, ask them anything and see how amazingly helpful they truly are!

    We also have the best quality of wheels on the market.

    Your KMC XD Rockstar 2 Rims  will be sent to you packed securely to ensure that you are as satisfied as can be.

    See Why People Choose and Trust Ozzy Tyres

    Another reason to buy KMC XD Rockstar 2 Rims  at Ozzy is for our fitting and balancing, which is free!

    When you purchase your new set of KMC XD Rockstar 2 Rims,  they will arrive to you fitted and balanced, this saves you both time and money as all you have to do is put them onto your car –, just like a spare wheel.

    No fussing around involved, it’,s that simple to be driving away in KMC XD Rockstar 2 Rims  in as little  1-2 working days.

    Visit our online store and look up KMC XD Rockstar 2 Rims  that are suitable to your vehicle.

    Just remember to make Ozzy Tyres  your first call!

    Click Here For More Information on KMC XD Rockstar 2 Rims

    Source