What is a LM7805 Voltage Regulator?

What is a LM7805 Voltage Regulator?

A LM7805 Voltage Regulator is a voltage regulator that outputs +5 volts.

An easy way to remember the voltage output by a LM78XX series of voltage regulators is the last two digits of the number. A LM7805 ends with "05" , thus, it outputs 5 volts. The "78" part is just the convention that the chip makers use to denote the series of regulators that output positive voltage. The other series of regulators, the LM79XX, is the series that outputs negative voltage. So:

LM78XX. Voltage regulators that output positive voltage, "XX"=voltage output.

LM79XX. Voltage regulators that output negative voltage, "XX"=voltage output

The LM7805, like most other regulators, is a three-pin IC.

Pin 1 (Input Pin): The Input pin is the pin that accepts the incoming DC voltage, which the voltage regulator will eventually regulate down to 5 volts.

Pin 2 (Ground): Ground pin establishes the ground for the regulator.

Pin 3 (Output Pin): The Output pin is the regulated 5 volts DC.

Be advised, though, that though this voltage regulator can accept an input voltage of 36 volts, it is recommended to limit the voltage to 2-3 volts higher than the output regulated voltage. For a 5-volt regulator, no more than 8 volts should be applied as the input voltage. The difference between the input and output voltage appears as heat. The greater the difference between the input and output voltage, the more heat is generated. If too much heat is generated, through high input voltage, the regulator can overheat. If the regulator does not have a heat sink to dissipate this heat, it can be destroyed and malfunction. So the two options are, design your circuit so that the input voltage going into the regulator is limited to 2-3 volts above the output regulated voltage or place a heat sink in your circuit to dissipate the created heat.

If you want to learn more about connecting a regulator in a circuit, check out How to Connect a Voltage Regulator to a Circuit

Source

Read More

Portable Air Conditioner Lowes

Portable Air Conditioner Lowes

Homeowners have a wide range of options to choose from when it comes to purchasing air conditioners. With the modern home always opting for way to maximize on the available space, the portable air conditioner Lowe’s has emerged as a great appliance that has become a huge hit among many people. Cooling your room with Portable Air Conditioner Lowes can be the best possible way of cooling your house in a healthy way.

These units are energy efficient and simple alternatives to window units or central air and they take care of certain areas that need to be cooled and are great for temporary and small spaces such as flats and apartments.

The operation of these portable air conditioners is simple as well. The indoor air vents through an exhaust tube that is installed on the window sill. Such units are actually portable and can be rolled to wherever you need them. These air conditioners are mobile and so you can carry them with you wherever you go. All you need to do is install the window air exchange panel and hose and then after that you turn it on.

The features of a standard Portable Air Conditioner Lowes include remote control, dehumidifier mode and timer. There is also a heat pump option that opens the door for all over the year round use.

If you want to remove condensed water from the portable air conditioner unit then most offer the facility of a water receptacle that comes with a direct drain option. However, it should also be noted that many are self evaporative to get rid of excess moisture as the unit runs.

You need to figure out the right size of unit that will suit your needs in the best way possible. Always remember that a bigger unit does not mean a better option. In fact, a portable unit that is too large in size will cycle on and off at a very frequent rate. In this way it will consume too much of energy and cause unnecessary wear on the electrical components of the unit.

Knowing important terminologies

Choosing the right portable air conditioner Lowe’s for your home is very easy. However, knowing certain important terminologies will help you in going a long way.

BTU – This means British Thermal Unit which is the international measurement of energy. In an air conditioning unit, a BTU is the measurement of the amount of heat that the unit can remove from the room.

EER – The Energy Efficient Ratio is derived by dividing the BTU by the number of watts. Thus, the higher the amount of EER, the more efficient the unit will be.

Thermostat – This adjusts the temperature of the air that comes out from the unit. They can be manual or programmable.

Filter – AC units with filters can be replaced and cleaned easily. It facilitates the presence of clean air in the room and clean air is important for healthy operation of the unit. It promotes a healthy environment as well.

Fan – The fan is the part that moves the air. A variable speed of the fan that is combined with an adjustable thermostat serves as an effective cooling unit. It is recommended that you search for cooling units that come with right/ left and up/down.

Chassis – A fixed chassis is a feature of a light weight air conditioning unit. The units that are smaller in size are easy to remove for the purpose of winterization. The larger and heavier models come with a slide out chassis. The unit is able to slide out easily.

You need to maintain your air conditioning unit in a proper condition so that it works properly for many years. It is essential to keep the coils and filter clean or get them replaced if needed. Remove the grill inside and then the foam filter. It is suggested to wash it warm and soapy water. Rinse in clean water and allow it to dry properly before securing it again. You should also vacuum the interior of the unit in order to get rid of bugs, dirt and leaves.

Source

Read More

Creatine hydrochloride

Ingredient Guide Creatine Supplementation At Its Best

WHY YOUR BODY NEEDS CREATINE

Creatine is a naturally-occurring nitrogenous organic acid. It helps the body supply energy to muscle and other cells.* Half the creatine we need is produced internally, the rest you must get from foods and supplements.

Creatine works for athletes looking to pack on muscle, strength, tone.* It works at the molecular level to promote what you desire in the gym: power, strength, energy, endurance and muscle growth support.* The body can function without creatine, but cellular work and repair happens at a diminished rate.

Replenish Your Energy Reserves*

SUPPLEMENT WITH CREATINE FOR MORE MUSCLE POWER*

Creatine occurs naturally in the body and comes from food sources like beef. Creatine may replenish your energy reserves during resistance training.*

Creatine works by saturating your muscles with a high-energy compound called creatine phosphate, and it can be used by the body as an immediate energy supply when you need to push out those last few reps in the gym.* Creatine also hydrates muscle cells with water, promoting muscle fiber growth.*

When those creatine phosphate stores run out, you risk cutting your workout short, so don't be depleted in the gym and always be prepared by adding creatine to your supplement line.

Get Pumped With This New Kid On The Block*

GET PUMPED WITH THIS NEW KID ON THE BLOCK*

Creatine HCl dramatically increases muscle cell volumization. This causes an anabolic response that orders those cells to expand. It promotes increased strength and power, muscle mass, workout capacity and recuperation.*

It is one of the most concentrated creatines in existence today.* Do NOT confuse with Creatine Ethyl Ester, these are different substances.

Get More Muscle With Less Product

HCL WATER SOLUBILITY POWER*

The biggest difference between Creatine HCl and other creatine products is its water solubility. According to studies, it completely dissolves in water. This is big news because humans are 60-70% water. That means Creatine HCl may completely dissolve in your body, which may reduce the chance of waste.*

Virtually none of Creatine HCl is converted to creatinine (an unusable byproduct of creatine monohydrate).*

HCl water solubility also means that your body can use the creatine quickly and efficiently.* Because there is no loading phase, HCl works very quickly.*

Micro-Dose Bulking

NO NEED TO CYCLE ON AND OFF CREATINE HCL*

Creatine HCl requires a much smaller dose than creatine monohydrate: take 1/4 tsp per 100 pound of bodyweight once per day. It gets better results than heaping scoops of many other products.

Since you don't have to cycle off this product, you can take it all year long and not risk a plateau. It continues to help support building muscle and strength as long as you use it as part of a healthy diet and exercise plan.* Creatine HCl helps you build muscle, it doesn't do it for you.

Source

Read More

Quantum Nutrition Labs

Quantum Nutrition Labs

** These statements have not been evaluated by the Food and Drug Administration. These products are not intended to diagnose, treat, cure or prevent any disease.

"Original", "Regular" and "Retail Price" are based on manufacturer suggested retail prices or informal surveys of Internet retailers, and, are intended for reference only. No sales may have occurred at the referenced prices. Sales, promotions and special offers are valid for a limited time and may be withdrawn or terminated without advance notice.

My Natural Market ("MNM") provides links and articles for informational purposes only. MNM does not review, approve or recommend any commercial site, and the links and articles are not intended to provide medical advice, diagnosis, or treatment, and are not meant to replace professional medical advice or apply to any of the products sold by MNM. THE INFORMATION ON THIS WEBSITE IS NOT INTENDED TO DIAGNOSE, TREAT, CURE OR PREVENT ANY DISEASE.

The information provided on this site is generally furnished by the manufacturer and/or distributor of the product and is intended for your general knowledge. IT IS NOT A SUBSTITUTE FOR PROFESSIONAL MEDICAL ADVICE OR TREATMENT. ALWAYS SEEK THE ADVICE OF A QUALIFIED HEALTH CARE PROFESSIONAL REGARDING ANY MEDICAL CONDITION.

Product sold on this site is not labeled or intended for resale. All orders placed through this website are subject to MNM acceptance, in its sole discretion. This means that MNM may refuse to accept, or may cancel, any order, whether or not it has been confirmed, without liability to you or any third party. MNM reserves the right to discontinue any program or offer.

My Natural Market, 12636 S 125 W Suite C Draper, Utah 84020

Source

Read More

Generator interlock

Select brand of load center breaker panel at right ->,

Safety is an important part of our lives. Safety for your person and safety for your investments and there isn’t a much more important investment than your home. Our breaker panel load center Interlock kit allows you to connect your portable generator to your electrical system safely without danger of backfeed to utility power. With the generator feeding your home electrical system it eliminates the need to run extension cords into your home, which is both a fire and a safety hazard. Our kits are designed to be installed by qualified electrical personnel and meet the strict requirements of the National Electrical Code and the National Fire Protection Code. These kits are Listed to UL 67 by an independent lab for use in the USA. Unfortunately they are not approved for use in Canada. Made in USA .

This kit provides the safety for your home electrical system that you need to protect your investment. We offer Interlock kits to fit most panel boards including a full line of accessories to connect your portable generator to your home electrical system.

Your panel board is a distribution and protection system for electricity in your home. Power is fed from the utility into the panel. From here it is run across the different branch circuit breakers and out into the rest of your home. The Interlock kit allows you to safely disconnect your panel from the utility feed and switch it over to the generator which is being fed through a new generator breaker. The Interlock kit allows only one of these feed systems to be operational at the same time which prevents both sources from being connected together. Without an interlock or a transfer switch there is always a chance that someone could forget to open the main breaker resulting in a danger of electrocution to linemen, destruction of your generator and fire. For more on these risks see our safety page.

With this one connection you can now use anything in your home because all the circuits in your home can be activated through the breakers in your panel. It also eliminates running unsightly and potentially dangerous extension cords to various parts of your home and the need to plug and unplug appliances and lights.

Once the InterLock kit is installed it is quick and easy to transfer power from utility to generator in case of a power outage. And it is just as easy to return once the utility power has been cut back on, just reverse the procedure below.

1) Turn main breaker to the "OFF" position

2) Turn all branch circuits to the "OFF" position

3) Slide Interlock plate up (down in some kits)

4) Connect and start generator

5) Turn generator breaker to the "ON" position

6) Turn on essential circuits one at a time. Allow appliances to start before engaging next circuit

Note: Large loads such as water heaters, microwaves, dryer etc may not all be able to run at the same time. Breakers themselves do not use power unless something in the room that they feed has been cut on so it is fine to have the breakers that feed all the bedrooms, living room etc. on so that you will have the power available for lights and such as you need them. Check What I can run with my generator to see what can be run at one time with the larger loads.

If you have gas, oil, or propane heat you can run your furnace or boiler and keep warm. However if you have electric heat most generators under 10000 watts will not have the capacity to run it. That is the same for central air as well. The Interlock kit will handle any size generator though so if you have an electric heat pump or want to run your air conditioning unit then you should consider a 12000-watt or 15000-watt generator.

The back feed breaker is used for the generator input connection to the panel. To install the back feed breaker and interlock you will need 2, 3 or 4 free spaces (look in the panel requirements for your kit to find the number of free spaces you will need which is on the kit selection page) in your panel. If you do not have enough free spaces in your panel you will need to obtain one piggyback breaker for each space that you need to create. Piggyback breakers are sometimes called half-height breakers because they are manufactured with two breakers in the space that one breaker normally takes. However, they are normally available ONLY in 15 and 20 amp ratings. Please note that if you remove a 15 Amp breaker from your panel you should order a 15 Amp piggyback breaker to replace it. This also means that you should have another 15 Amp breaker somewhere in your panel to pair it with. If you are removing a 20 Amp breaker then the same should apply. If you need to pair a 15 Amp and a 20 Amp breaker then you should order a 15/20 Amp piggyback breaker. If you cannot free-up the necessary spaces then you CANNOT use these interlock kits.

In additional to the interlock kit we can provide the generator cord, outdoor power inlet box, generator load meters and utility power return alert as shown below. Items on this image are clickable.

Complete installation instructions are included with every kit. Kit comes with back plate, front slider plate, double-stick pads, screws, drill bit, thread lock and labels.

1) Disconnect power to panel.

2) Mount backing plate in proper position on panel cover with double-stick pads.

3) Remove panel cover.

4) Relocate branch breakers to free up necessary space for generator back feed breaker and interlock.

5) Install generator back feed breaker.

6) Install retaining strap around back feed breaker and label.

7) Drill 3 or 4 holes through panel cover using backing plate as a guide.

8) Remove burrs and file away spot of paint to allow for good electrical ground contact.

9) Install front slider plate with included screws.

10) Turn off generator and main breakers and re-install panel cover.

11) Test interlock for proper operation.

12) Apply thread lock to interlock screws.

13) Attach labels.

These kits should be installed, tested, serviced and maintained by qualified personnel. No responsibility is assumed by the manufacturer Generator Interlock Technologies, LLC or No Outage.com LLC for any consequences arising out of the misuse of this product.

The kit includes a specially designed back plate and front plate to fit the specific breaker panel, binder posts, binder screws, drill bit, thread lock, install instructions, labels for: main breaker, generator breaker, operating instructions, danger, retaining strap, retaining strap label. Click here for an image or a typical kit contents. Due to the wide variety of breakers available, the kit does not include the branch breaker that is used as the generator backfeed breaker. These are usually easy to purchase locally. The outdoor inlet box. building wire and generator cordset should be purchased separately.

These interlock kits are a perfect alternative if there is no room for a separate transfer switch or transfer panel on the wall next to your breaker panel, or on the outside of your house near the power company meter. These kits are Listed to UL 67 by an independent lab. However, these interlock kits DO require:

* modification of your load center breaker panel

* free branch breaker spaces

* proper installation and check of operation

Unlike many other breaker-based factory-built transfer switches, these kits are not functional when the front panel is removed.

Using these interlock kits to provide power to your whole breaker panel can result in overloading your generator. Damage to the generator and some appliance loads can result from these overloads. To avoid this possibility we recommend meters be installed on your generator feed to the panel. This will tell you how much load is being carried at any time and how much spare capacity is available for additional loads. With this information you can determine which branch circuits in your breaker panel can be turned on. Click here for our wide selection of generator meters.

During a power outage while the generator is powering your panel the main breaker will be off. Therefore you will have no way of knowing when utility power has been restored (unless you can easily see neighbors' lights come back on). We sell a low cost solution to this problem. See the PowerBACK™ utility power return alert module.

Source

Read More

Jeffrey Court

Jeffrey Court About Us

Pictured: Jeffrey Court Headquarters –, Norco, CA

Jeffrey Court’s story is one of entrepreneurial spirit, love of craft and dedication to innovation. Founded in 1991 by Jim and Janice Lawson, they set out to bring their love for hand painted tiles to the mainstream market.

In true innovator style the Lawson’s discovered a way to permanently affix hand-painted designs as decals on ready-made tiles. Needless to say Jeffrey Court tiles grew in popularity. Soon homebuilders were looking to include Jeffrey Court in their designer upgrade options. It was at that point that the Trade sale division of Jeffrey Court was born.

Today, Jeffrey Court now operates two distinct divisions, Trade/Designer and Retail Sales who’s combined SKU count is over 3,000. The retail division’s focus is a series of main-stream value driven products available through purchase only at The Home Depot®.

The Trade Sales Division focus is to bring cutting edge designer-minded products to the Architectural, Kitchen &, Bath, and Interior Design communities alike. Our product designers work with a litany of interior designers, product developers, and industry insiders to deliver the very best products possible for our end consumers.

Since Jeffrey Court’s founding the cornerstone by which our products are built upon is our commitment to three core values: (1) Timeless &, fashion forward design, (2) Constant product improvement, and (3) Dedication to our Trade &, Retail Partners Success. This has allowed us to become leaders in the industry by: smartly combining different decorative elements, having a keen eye for inspired design, and a wide assortment of in-stock decorative tile, stone, glass and metals elements.

Pictured: Main Warehouse –, Norco, CA

The Jeffrey Court Mission

Design and purvey the highest quality decorative tile, natural stone, metal, and glass elements that offer the best value possible for our customers.

Source

Read More

Wyse Terminals and Wyse Thin Client Devices

Wyse Thin Client Wyse -- Thin Client Devices and Dumb Terminals

Whether you're looking for Wyse Winterm thin clients or terminals (aka dumb terminals, green screens or general purpose terminals), you've come to the right place. Winterm thin clients deliver the productivity and application flexibility of a PC without the PC downsides of high service costs, low reliability, and short product life. Dumb terminals (aka green screens or general purpose terminals) are great, low cost units for data entry and retrieval. You can purchase Wyse terminals here at unbeatable savings, whether new or remanufactured.

The Wyse Dumb Terminal or Wyse Thin Client Device you need Right at your Fingertips

Questions? Call us at 800-457-8499 or e-mail for information and pricing on Wyse dumb terminal and thin client models.

The Best Wyse Terminals and Thin Clients You Can Buy

To order any of our new or Wyse terminals or Wyse Winterm Thin Client Terminals call us at 800-457-8499 or 440-953-1119 or e-mail us. Your purchase order, with credit approval, is welcome, as well as all major credit cards.

Source

Read More